View a Larger Image of Bandsaw Blade 105" x 3/4" x 3 TPI Thin Positive Claw
  • View a Different Image of Bandsaw Blade 105" x 3/4" x 3 TPI Thin Positive Claw
  • Default
  • Default
Item 140190
Model PSW105343

Timber Wolf - Bandsaw Blade 105" x 3/4" x 3 TPI Thin Positive Claw



Save 20% Now Through April 30, 2021

Compare With


Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!

  • High silicon, low carbide steel
  • Ideal for resawing thick stock
  • Runs cooler and lasts longer
  • Runs under low tension which requires less horsepower
  • Thin kerf


Articles & Blogs

Timberwolf yt thumb

Timber Wolf Bandsaw Blades are not your typical Bandsaw Blades.

Read More >


3.9 out of 5 stars
10 Reviews
  1. 1.0 out of 5 stars
    by on

    Not working for me

    I have never got the result from this blade like expected. I also bought a Timber Wolf 1/4" blade which works fantastic, but I use this one for resawing and it cuts super slow, burns, and cuts curved. I've tried changing the tension and have to remove pitch from the blade every use. I haven't cut anything thinker than 9" with it and even soft woods like Spanish cedar is an issue. I'm wishing I bought the 2/3 TPI instead, but I don't know if that would have been an improvement.

  2. 5.0 out of 5 stars
    by on

    Re sawing

    Upgrade from 1/2" to 3/4" for re sawing works great

  3. 4.0 out of 5 stars
    by on

    Nice blade

    Good Blade as advertised

  4. 5.0 out of 5 stars
    by on

    Exceptional Woodcraft Customer Service

    I left an earlier review with 1 star. Woodcraft called me up, UNSOLICITED, and replaced the blade for free. Actually 2, as I had bought a second and used it also with poor results. Have yet to use my two brand new blades so don't know if they are better. Woodcraft gets 10 stars for customer service.

  5. 5.0 out of 5 stars
    by on

    Great Resaw Blade

    Cuts through 12" Cypress like butter!

  6. 1.0 out of 5 stars
    by on

    not smooth running

    Blade does not track evenly due to an imprecise weld joint. Noisey and vibration.

  7. 5.0 out of 5 stars
    by on

    Works great just as expected, no problem

    Used to resaw 12" and 14" rough hard timber! During the cuts there was no binding or slow down and the cut was clean and precise.

  8. 3.0 out of 5 stars
    by on

    Lasted longer than my old blades, but...

    seemed to overheat and dull quicker than expected when milling fresh black walnut into turning blanks. I expected this blade to last much longer than this.

  9. 5.0 out of 5 stars
    by on

    One of the best blades I've used.

    I am an intermediate level wood turner.

  10. 5.0 out of 5 stars
    by on

    Great blade!!!

    Used this blade to re-saw some 8" wide walnut and figured maple using a Delta 14" with riser blocks. Cuts smoothly, and easily. Not real fast, but that is a pretty thick cut. Have used them in the past and will continue to use them in the future!

Top of Page