T-88 Epoxy Adhesive - 50 ml Cartridge with Gun

Now instead of buying everything separately, you can get a T-88 Epoxy Cartridge, dispensing gun and mixing tube together in one package ready to use. Once you have the gun, all you need to buy are cartridges and mixing tubes to keep going. It’s an incredibly handy way to dispense small amounts of T-88 just where you want it in just the amount you need. The epoxy comes out premixed as it passes through the mixing tube. Didn’t use all the epoxy in the cartridge? No problem! Just remove the mixing tube, replace the caps on the cartridge, and you’re ready for the next time.

Features:

• T-88 Epoxy Cartridge, dispensing gun and mixing tube all in one package
• Epoxy comes out premixed as it passes through the mixing tube
• Easy to use leftover epoxy later
• Exhibits outstanding adhesion on a wide variety of materials
• Fills voids, gaps, cracks and holes
• When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals
• Will not stain wood and is immune to fungus and rot

• Size: 50 ml (1.6 oz.) cartridge
• Type: 2-component, solvent-free epoxy/polymercaptan adhesive
• Application: Use for fast repairs to wood, fiberglass and other materials
• Mix Ratio by Volume (Resin to Hardener): 1:1
• Mixed Viscosity: 10,500 centipoise (cps)
• Maximum Service Temperature: 125°F
• Minimum Application Temperature: 40°F
• Working Time / Gel Time @ 77°F: 4-5 Minutes (30g mixture)
• Tack Free Time @ 77°F: 5 Minutes

• (1) Quick Cure T-88 Epoxy Adhesive - 50 ml Cartridge
• (1) Dispensing Gun
• (1) Mixing Tip