Starrett - Starrett 116" Bandsaw Blade 3/4"x.032x4/Hook
The Starrett Duratec™ SFB Blade combines the best features of a flexback and a hardback into a Super Bandsaw Blade. Made from carbon steel with a flexible back, the blade is designed for contour...
Item 422978Model BBPF-14-14-115
Item 412085Model 708642BK
Item 160448Model 91090-111-WCS
Item 856291Model ICS31230-52
Item 842737Model 707120
Item 840939Model CNS175-TGP252
Item 831959Model 708457DXK
Item 162003Model PM-2500
Item 164315Model 91250-116-WCS
Item 164316Model 91350-116-WCS
Item 164314Model 91140-116-WCS
Item 160435Model 91434-099-3/4-WCS
Item 160472Model 91528-115-WCS
Item 160431Model 91528-093-1/2-WCS
Flexible carbon steel back
Fine tooth pitch for smooth cuts
Cuts hardwood and softwood
For all vertical/stationary two-wheel bandsaws
Blade Selection in just a few steps
Blade Length – Check owner’s manual for details
Blade Width – Use the widest blade possible for straight cuts. Radius cuts, use the following
1/8" radius = 1/8" blade
5/16" radius = 3/16" blade
5/8" radius = 1/4" blade
1-7/16" radius = 3/8" blade
2-5/8” = 1/2" blade
Regular – A conventional tooth used for general purpose sawing, straight or zero rake.
Hook – A 10° rake angle for fast cutting of hardwoods.
Skip – A 0° rake angle with expanded gullet area, excellent for cutting soft woods.
Pitch/Teeth per inch – Choose a coarser pitch if the speed of the cut is most important. Choose a fine pitch if finish is most important.
- Flexible carbon steel back
- Fine tooth pitch for smooth cuts
- Cuts hardwood and softwood
- For all vertical/stationary two-wheel bandsaws