Router Bit Starter Set, 1/4" Shank

Get started on your new router with the WoodRiver® Router Bit Starter Set. These four common profiles – straight, cove, round over and chamfer – are designed to get you started on your woodworking adventure and cover several typical router cuts.

The straight bit can cut a rabbet or flat-bottomed groove. The cove bit will make a channel along the edge of your workpiece. The round over bit will create a smooth radius edge on the workpiece. The chamfer bit will cut an angled edge.

All bits, except the straight bit, include a bearing that rides along the edge of the workpiece to hold the bit in relation to the edge as it cuts.

Each router bit has a 1/4" shank. Use it in your handheld router, laminate trimmer or with a router table.

WoodRiver router bits are suitable for use with most woods, plywood, particleboard and some plastics.

Bit Specifications
Straight Bit
Shank: 1/4"
Diameter: 1/4"
Cut Length: 1"
Overall Length: 2-3/8"

Cove Bit
Shank: 1/4"
Diameter: 7/8"
Radius: 1/4"
Cut Length: 3/8"
Bearing Diameter: 3/8"
Overall Length: 2-1/64"

Round Over Bit
Shank: 1/4"
Diameter: 1"
Radius: 1/4"
Cut Length: 7/16"
Bearing Diameter: 1/2"
Overall Length: 2-5/32"

Chamfer Bit
Shank: 1/4"
Diameter: 1-7/16"
Angle: 45°
Cut Length: 9/16"
Bearing Diameter: 1/2"
Overall Length: 2-9/32"