View a Larger Image of Replacement Feed Belt 16/32


Replacement Feed Belt 16/32

Out of Stock
  • Ships for Free
  • Replaces feed belt for Jet 16/32 Drum Sander - Fits older style 629004K80 grit

    This product is currently unavailable for purchase.


    Replaces feed belt for Jet 16/32 Drum Sander - Fits older style 629004K

    • 80 grit


    2.33 out of 5 stars
    6 Reviews
    1. 1.0 out of 5 stars
      by on

      Not same width as OEM

      Purchased April 3 but just now installing. Found that this belt is 16" wide while the OEM belt that came with the machine is 16 1/4" wide. Consequently, it is not wide enough to ride properly between the two ceramic tracking blocks. So far I have been unable to make any adjustments that will cause this belt to track properly. It tracks to one side and flipping the belt does not help. Have tried other suggestions from the owner manual but no progress. Have put the old belt back on for now. It is worn slick but at least it tracks correctly.

    2. 1.0 out of 5 stars
      by on

      Same issue as almost all others. BELT IS TOO NARROW!

      Same issue as almost all others. Bought the belt a few years back as a spare. Didn’t expect the belt to be more than 1/4” too narrow. Doesn’t stay on ceramic blocks. Will not align and track per manual. Don’t waste your money like I did.

    3. 1.0 out of 5 stars
      by on

      Check belt width

      The replacement belt from woodcraft never made it into use. After trying to adjust the tracking for 1/2 day to no avail, the belt slipped off the ceramic guide block and tore. The usual excellent Woodcraft customer service refunded me instantly. I purchased an OEM replacement which installed and tracked with no problems. I noticed the OEM belt and my original are 16 1/4 inches wide, not 16 as Woodcraft's is. Maybe a single instance, maybe not. I informed Woodcraft of this. Check your belt width carefully.

    4. 5.0 out of 5 stars
      by on

      Works Well

      Works great and cheaper than others I've seen. Had an issue with tracking, as I've seen posted on various sites (would only track in one direction), however the machine was sitting a bit racked on a portable stand. Leveled everything out and the problem was solved.

    5. 5.0 out of 5 stars
      by on

      thank you

      thank you

    6. 1.0 out of 5 stars
      by on

      Not a good replacement for OEM

      This belt would not track properly. It its 1/4" less wide than OEM, so the tracking guides do not engage. I spent the better part of a day trying to get this belt to track, eventually I got an OEM belt which I was able to get to track with a minimum of effort. This is the only product I have ordered from Woodcraft that has not worked as advertised.

    Compare With

    Top of Page