View a Larger Image of Premium Doweling Jig
Task 07300TK
Item 124315

Premium Doweling Jig

$66.50

In Stock

The patented automatic self-centering action of these dowel jigs assures accurate center drilling every time, even on round objects. Large steel clamping screw tightens the tool like a vise, with...

You May Also Like

Details

The patented automatic self-centering action of these dowel jigs assures accurate center drilling every time, even on round objects. Large steel clamping screw tightens the tool like a vise, with rugged aluminum sides holding work securely without damage to the wood. Large 2" to 2-7/16" capacity on all models will handle most size requirements. Drill guide centers are hardened, guide holes are precision drilled and reamed for extreme accuracy. USA.


Dowel Jig Specifications
  • Self Centering
  • Includes 2 each size bushing 1/4, 5/16,and 3/8
  • 2-3/8 wide capacity
  • Made from aircraft grade aluminum
  • Steel plated for corrosion prevention

Videos

Reviews

4.41 out of 5 stars
22 Reviews
  1. 5.0 out of 5 stars
    by on

    Worked Great for Novice

    I am an very novice woodworker. I used this jig to edge join some 1x pieces. I found it to be intuitive to use, and very precise. If you misalign the mark on the jig and your pencil line on the work piece even by a hair, it will affect the alignment of the pieces. I used a pencil that produced a line of the same width as the mark on the jig, and I got perfect results.

  2. 3.0 out of 5 stars
    by on

    Could be improved

    This product would be greatly improved if it had alignment lines on the jig that would locate the center of the holes. These could be lined up with a pencil line on the work piece so that it would become a precision tool.

  3. 5.0 out of 5 stars
    by on

    Task Premium Doweling Jig

    as I have 30+ years of custom woodworking experience I have used many doweling jigs(some to my displeasure)the self-centering feature, the different size bushings & ease in changing them-all add to the best doweling jig I've ever used-I'm currently using it on the building of "Heirloom quality" desk- A+ in my book

  4. 4.0 out of 5 stars
    by on

    Task doweling jig

    Killer, well-machined and sturdy tool. Extremely accurate with zero set-up time and learning curve. The centering lines that can be viewed through the opening on the side are a nice value-add for applications where the preset locations are ineffective. I am very pleased and it is well worth the money. My only wish is that I could buy a single version that has both wide capacity, and 4 tapped bushing holes.

  5. 5.0 out of 5 stars
    by on

    Nice!

    This thing is made like a tank, I belive it will last for a very LONG time before it gets damaged. It is very very easy to use, and you get consistent results with it every time. I only wish it came with more 3/8" bushings, instead of 2 each of 1/4", 5/16" and 3/8", but this is only due the fact that I dont think I will ever use 1/4" nor 5/16" dowels, but on second thought, I guess its better to have the tool and dont need it, than needing it and not having it. And after all, you can buy extra bushings for cheap. Its a nice jig and would buy it again, maybe if someone stole mine, because other than that I dont belive this thing will give up anytime soon.

  6. 5.0 out of 5 stars
    by on

    Great Tool! Very solid!

    I've used this jig for cabinet building projects, and it works great every time! The construction is all solid CNC machined metal, so you know the hole will be drilled right every time. The jig fastens very securely to your work piece, and the bushings fit the drill bits perfectly. It's well worth paying a little extra to get the premium version.

  7. 4.0 out of 5 stars
    by on

    Simple and well made

    A simple effective jig that can have its performance improved by making a couple of shopmade items. Firstly an adjustable rod with 5/16 or 3/8 pins that fit into the last hole drilled and the last drill insert on the jig. this allows accurate positioning along a long joint. The second is a set of shims(1/16, 1/8, 1/4 & 1/2") that have hook shaped slots that fit over the guide rails of the jig. It allows joints to be offset for legs so there is more room for corner blocks or if you want to have a double row of dowells for a stronger joint. I hope TASK sees this and makes these items as an optional extra. (Dowelmax supply them as standard with their jig)

  8. 5.0 out of 5 stars
    by on

    Great jig!

    Very useful and time saving jig.

  9. 5.0 out of 5 stars
    by on

    Got the job done.

    I used this jig in my woodworking club at school. The kids and I used this to make simple but joints for 4X6 picture frames. The only error came from moving too fast to get the project done. When time was taken, all the students were able to drill properly placed holes and in the end, the parents were jumping for joy. It works great and will be in my shop for a long time, or until it gets run over by a tank.

  10. 5.0 out of 5 stars
    by on

    Excellent Jig

    Does exactly what it's supposed to do exactly the way it says it does. Well built!

  11. 4.0 out of 5 stars
    by on

    Great addition

    Jig works exactly as advertized.

  12. 5.0 out of 5 stars
    by on

    Great tool, I was very impressed.

    Used on cabinet face frames. Lots faster and more accurate than half lap joints.

  13. 5.0 out of 5 stars
    by on

    Great tool and beyond my expectations

    Great for cabinet face frames, edge panel joining and joint alignment. Money well spent.

  14. 5.0 out of 5 stars
    by on

    Excellent Jig

    Usually when using dowels, more than one dowel is needed to give strength to a joint. The problem is in the alignment of the dowel holes with the mating part of the joint. There is no margin for error. This jig provides for two equally sized holes in the jig so that matching the holes to the mating joint yields an exact alignment of the holes. I personally do not know how one can match more than one hole in a joint without using this type of system. I have found this jig to be well made and it works very well for its purpose.

  15. 5.0 out of 5 stars
    by on

    VERY, VERY GOOD

    EASY TO USE!!!

  16. 5.0 out of 5 stars
    by on

    Great product

    This is a great product, strong, precise, do great job

  17. 5.0 out of 5 stars
    by on

    Very Precise

    This is just what I expected. It's very precisely made, and sturdy. Don't buy the cheaper one; you will love this one.

  18. 4.0 out of 5 stars
    by on

    Very good, and economical

    The next step up from this tool is about 6 times as expensive. I'll work within the mild limitations of this tool thank-you. Centers well; sometimes just a bit off, but workable with the final sanding. Much easier to place from the end edge if a spacer is used. Just place the jig on a flat surface on end, place a premeasured spacer board in the slot, and place the board to be drilled on top of that. Placement becomes consistant with every board such as putting a face frame together. Tip, make the spacer just a tad less wide than your piece to be drilled; it will slip out of you way after you tighten the clamp. The handle that tightens the whole thing up is too short, and it's, therefore, a bit difficult to pop the jig back open. FOR THE MONEY, it works just fine.

  19. 2.0 out of 5 stars
    by on

    Does not measure up

    The bad news: I used the jig for joining some 4 X 1 mitered joints. Joints did not align & were "twisted" even after several attempts. I have since discovered that the same tool is availble under several different names (e.g. Dowl-it, Task, maybe others). There are several different variants (some with fixed drill holes, others with replaceable drill guides). IMO, all will suffer from alignment problems. In addition, the holes are not equally spaced. The good news: Woodcraft was excellent to work with. I was able to return the tool without any problem. I ultimately decided to pony-up the money for a Dowelmax. It's expensive, but it's a joy to use and the results are terrific.

  20. 4.0 out of 5 stars
    by on

    Good features, moderately accurate

    I used this jig on a project that had a total of 144 dowels in all the joints. The jig operates just fine. However, some of the joints come out slightly "twisted", so apparently the jig is not always 100% centered. I've had this same problem with every doweling jig I've ever bought, so I think it's just par for the course with these. It's the only jig I've had that has all 4 holes threaded for bushings, which I like. It's also overall larger than other jigs, which I also like. Overall, even with the slight inaccuracy, it's still the best jig I've had.

  21. 3.0 out of 5 stars
    by on

    Use only as Instructed...

    I make tracks (12" with dowels for joining) for trolleys to ride on. I thought I could use measurements from the end of the center piece, but the tool is not designed for that. With the help of tech support we figured out no 2 tools were same mic measurement from the either end. Other than that tool works good.

  22. 4.0 out of 5 stars
    by on

    Very accurate results!

    Used dowels to connect 1 x 2 vertical supports to front edge of shelving on built-in bookcase.

Top of Page