Picture Frame Miter Clamp
Easily clamps all styles of picture frames up to 48" x 48". Plated rods are fully threaded, and thumb nuts make accurate adjustments of the corners quick and easy. Also clamps small boxes and...
You May Also Like
- Picture frame miter clamp
- Accommodates frames up to 48" x 48"
- Tightens all four corners simultaneously
- Also used to clamp small boxes and furniture
Articles & Blogs
As part of our Mother’s Day series, we will introduce you to several superstar moms (and grandmothers!) who combine their love of family with their love of woodworking. Meet Lucette Jones - she found an old kitchen knife at 10 yrs old and hasn't stopped carving since.
I'm a woodworker and needed to make several large (3' x 3') frames. This was inexpensive and would handle large frames. It worked like a champ. By carefully tightening the screws, I could insure that each corner mated perfectly. When it was all tight, I checked for squareness and again - perfect. This worked much better than expectations, especially given the price.
Better with design improvements
You have to watch that one or more corners stay flat. They tend to get out of vertical alignment as pressure is applied. Have to be very careful while tightening. I had to sand corners that did not align up and down. An adjustable interior clamp device for each corner would be a gigantic improvement. Another improvement would be a solid triangle under the "L" corners for the frame back to rest on.
Performed exactly as advertised
used to build 2 1/2 x 4 foot decorative frames to accentuate a large, blank wall.
This is wonderful!
Man does this work great! Easy to use and change to different sizes. Highly recommend!
havent used it yet
Enables Very Tight Clamp
Enables a very tight clamp using a 3/8" wrench. Got here very fast, ordered the clamp and some sandpaper and the shipment arrived in three days.
Excellent frame clamp
I use this clamp when making my own custom picture frames. Saves a ton of time and a ton of frustration.
Great clamping assembly
I use this to make custom picture frames. Not as pictured. Made of aluminum corner blocks.
Miter Clamp Review
I am using this miter for making frames and boxes for cork boards. It is the ideal appliance for ensuring perfect alignment of the corners for gluing. Exquisite simplicity of use. I highly recommend it for any framing application.
simple, yet effective
The product is simple, but does exactly what it says. It gets kinda awkward when you have to connect the rods together. I would buy it again.
simple & efficient
effictive and easy to use
I used this to clamp the 4 pieces that form the kick board base for night tables that I am building. It worked very well
Very reasonable price and practicality
Used product to make picture frames.It worked extremely well,especially for the reasonable price.
Works great. Brings miters together.
Easy to use. I just temporarily clamp with a corner clamp and square the assembled frame to finish while glue sets.
Ease of handeling
I make frames for my oil and acrylic paintings. It is accurate and easy to set up The thumb screws are not designed to tighten easily. They need a flat side to grip while tightening
I would buy again
The picture frame miter works great, it holds the ends together great. The only thing I had to buy longer ends for big pictures. The clamps worked great.