Pre-Selling Special Orders Now!
This Item Will Not Be Available After Monday, September 17, 2018... Estimated Delivery is December 2018.
Perfectly Radiused Corners…In Seconds on Your Router TableProjects look fully finished with the corners softened. Sometimes you want a little, sometimes you want a lot, but you always want “some”. Sharp corners are an invitation to chipped edges for the project and painful encounters...
Details
Perfectly Radiused Corners…In Seconds on Your Router Table
Projects look fully finished with the corners softened. Sometimes you want a little, sometimes you want a lot, but you always want “some”. Sharp corners are an invitation to chipped edges for the project and painful encounters when you bump into a piece. With Woodpeckers Radius Quick-Jigs you can forget your jig saw and belt sander routine and accurately create clean, precise radiused corners in seconds using your router table.
When We Say “Quick-Jig”, We Mean Really Quick. Woodpecker’s latest OneTIME Tool is so quick and easy to use you don’t even need a clamp, nail or screw to use it. Just select your radius, index the registration edges onto your workpiece, and use a bearing-piloted pattern bit to cut your stock to match the jig. Designed for safe use on a router table, you can literally hold the jig in perfect position with one hand while you guide your work along with the other. There are gentle curves at the beginning and end of each pattern to smoothly blend the start and end your cuts…no annoying start and stop marks that require extra sanding.
Get A Perfect Radius Every Time. With radii of 1/8” and 1/4”, you can forget searching through your collection of paint cans and jelly jars to find the curve that fits your project. You can easily “eye-ball” the finished look by simply dropping the different jigs in place. Each Radius Quick-Jig is meticulously machined to exacting tolerances from aircraft grade aluminum, anodized for surface protection and laser engraved with each radius clearly marked. As a OneTIME Tool you’re getting a tool custom machined just for you, not stamped out or injection molded by the thousands.
Ordering Options. This jig has two radii, 1/8" and 1/4", perfect for production of the same pieces over and again. If you never know what you’re going to build next, check out the complete set with all six jigs for a total of 12 radii (1/8" to 1-1/2").
These Radius Quick-Jigs are part of Woodpeckers OneTIME Tool program and are only made to order in Woodpeckers' Strongsville, Ohio shop. Deadline to order yours is September 17, 2018. Once the deadline passes and orders are filled, the Radius Quick-Jigs will be retired from our product line. Delivery is scheduled for December, 2018.
Projects look fully finished with the corners softened. Sometimes you want a little, sometimes you want a lot, but you always want “some”. Sharp corners are an invitation to chipped edges for the project and painful encounters when you bump into a piece. With Woodpeckers Radius Quick-Jigs you can forget your jig saw and belt sander routine and accurately create clean, precise radiused corners in seconds using your router table.
When We Say “Quick-Jig”, We Mean Really Quick. Woodpecker’s latest OneTIME Tool is so quick and easy to use you don’t even need a clamp, nail or screw to use it. Just select your radius, index the registration edges onto your workpiece, and use a bearing-piloted pattern bit to cut your stock to match the jig. Designed for safe use on a router table, you can literally hold the jig in perfect position with one hand while you guide your work along with the other. There are gentle curves at the beginning and end of each pattern to smoothly blend the start and end your cuts…no annoying start and stop marks that require extra sanding.
Get A Perfect Radius Every Time. With radii of 1/8” and 1/4”, you can forget searching through your collection of paint cans and jelly jars to find the curve that fits your project. You can easily “eye-ball” the finished look by simply dropping the different jigs in place. Each Radius Quick-Jig is meticulously machined to exacting tolerances from aircraft grade aluminum, anodized for surface protection and laser engraved with each radius clearly marked. As a OneTIME Tool you’re getting a tool custom machined just for you, not stamped out or injection molded by the thousands.
Ordering Options. This jig has two radii, 1/8" and 1/4", perfect for production of the same pieces over and again. If you never know what you’re going to build next, check out the complete set with all six jigs for a total of 12 radii (1/8" to 1-1/2").
These Radius Quick-Jigs are part of Woodpeckers OneTIME Tool program and are only made to order in Woodpeckers' Strongsville, Ohio shop. Deadline to order yours is September 17, 2018. Once the deadline passes and orders are filled, the Radius Quick-Jigs will be retired from our product line. Delivery is scheduled for December, 2018.
What are our OneTIME Tools? They’re the tools that our partners at Woodpeckers plan to run once. Often these are tools we ourselves would like but can’t put in full production. The process is simple; they build a couple, take some pictures and open a 10-20 day window for others to jump on the production run. Once they know how many to make, they get them done and move on to something else.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.
Compare With
-
See Price in Cart
$14.99 -
$129.98 Clearance
$154.99 -
$24.99