Pre-Selling Special Orders Now!
This Item Will Not Be Available After Monday April 2, 2018... Estimated Delivery is June 2018.
NEW! From Woodpeckers®Clamp Support System 24Act Now, Order Deadline Is April 2, 2018Streamline Glue-Ups, Save Time and Your SanityWin the Race Against the Clock Every Time! Every woodworker knows glue-ups can be stressful. Glue open times are only minutes long and every board and every...
Details
NEW! From Woodpeckers®
Clamp Support System 24
Act Now, Order Deadline Is April 2, 2018
Streamline Glue-Ups, Save Time and Your Sanity
Win the Race Against the Clock Every Time! Every woodworker knows glue-ups can be stressful. Glue open times are only minutes long and every board and every clamp must be positioned just so. And all too often, something you didn’t plan on pops up and slows you down stealing a few of those precious minutes. Whew!
Enter. . . Woodpeckers New Clamp Support System 24. The CSS 24 is the next best thing to having an extra pair of hands at glue-up time. This simple, yet effective, clamp holding fixture buys you extra time during glue-ups by streamlining the process. The system also positions your clamps to optimize clamp pressure across panels or put clamp pressure just where you want it, as in raised panel door glue-ups. By keeping the clamp heads perpendicular to the boards’ edges, pressure radiates out evenly in both directions. This also keeps boards from sliding along wet glue lines.
Bar Clamps and Parallel Face Clamps. The CSS 24 comes in two models to handle the style of clamps you’re using. The bar clamp style offers a range of bar clamp styles to include bars up to 1/4" in the smaller slot and heavier 3/8" bars in the wider slots. Both styles use four pieces that make up a 24” square with 10 positions for clamps on each side of the fixture.
Fast Assembly and a Variety of Sizes. The four sides of the CSS 24 are quickly assembled using notches in each bar that forms a sturdy “egg crate” joint. Notches are spaced at 4¾” intervals allowing a wide variety of fixture sizes to accommodate your glue up size. For longer panel glue-ups simply use a second, or even third, CSS 24 to handle your needs. It couldn’t be easier!
The top edge of the fixture is slightly above the plane of the clamp bar. This feature lets the wood parts rest on this flat edge to assist in leveling the boards. It also prevents glue squeeze-out from reacting with uncoated steel that blackens wood. The fixture is made of heavy duty, 3/32” thick steel that’s 3” wide. You’ll especially appreciate the thick powder coat paint finish that dried glue barely sticks to. When it does you can easily flick it right off.
You’ll find Woodpeckers CSS 24 the best glue up buddy a woodworker can have. Put them to work in your shop and take the stress out of glue-up time.
When They’re Gone, They’re Gone! Like all our OneTIME Tools, the Clamp Support System 24 is only made to order in our Strongsville, Ohio machine shop. The Deadline to order yours is April 2, 2018. Once the deadline passes and orders are filled, this tool will be retired from our product line. Delivery is scheduled for June, 2018.
Made in U.S.A.
Clamp Support System 24
Act Now, Order Deadline Is April 2, 2018
Streamline Glue-Ups, Save Time and Your Sanity
Win the Race Against the Clock Every Time! Every woodworker knows glue-ups can be stressful. Glue open times are only minutes long and every board and every clamp must be positioned just so. And all too often, something you didn’t plan on pops up and slows you down stealing a few of those precious minutes. Whew!
Enter. . . Woodpeckers New Clamp Support System 24. The CSS 24 is the next best thing to having an extra pair of hands at glue-up time. This simple, yet effective, clamp holding fixture buys you extra time during glue-ups by streamlining the process. The system also positions your clamps to optimize clamp pressure across panels or put clamp pressure just where you want it, as in raised panel door glue-ups. By keeping the clamp heads perpendicular to the boards’ edges, pressure radiates out evenly in both directions. This also keeps boards from sliding along wet glue lines.
Bar Clamps and Parallel Face Clamps. The CSS 24 comes in two models to handle the style of clamps you’re using. The bar clamp style offers a range of bar clamp styles to include bars up to 1/4" in the smaller slot and heavier 3/8" bars in the wider slots. Both styles use four pieces that make up a 24” square with 10 positions for clamps on each side of the fixture.
Fast Assembly and a Variety of Sizes. The four sides of the CSS 24 are quickly assembled using notches in each bar that forms a sturdy “egg crate” joint. Notches are spaced at 4¾” intervals allowing a wide variety of fixture sizes to accommodate your glue up size. For longer panel glue-ups simply use a second, or even third, CSS 24 to handle your needs. It couldn’t be easier!
The top edge of the fixture is slightly above the plane of the clamp bar. This feature lets the wood parts rest on this flat edge to assist in leveling the boards. It also prevents glue squeeze-out from reacting with uncoated steel that blackens wood. The fixture is made of heavy duty, 3/32” thick steel that’s 3” wide. You’ll especially appreciate the thick powder coat paint finish that dried glue barely sticks to. When it does you can easily flick it right off.
You’ll find Woodpeckers CSS 24 the best glue up buddy a woodworker can have. Put them to work in your shop and take the stress out of glue-up time.
When They’re Gone, They’re Gone! Like all our OneTIME Tools, the Clamp Support System 24 is only made to order in our Strongsville, Ohio machine shop. The Deadline to order yours is April 2, 2018. Once the deadline passes and orders are filled, this tool will be retired from our product line. Delivery is scheduled for June, 2018.
Made in U.S.A.
What are our OneTIME Tools? They’re the tools that our partners at Woodpeckers plan to run once. Often these are tools we ourselves would like but can’t put in full production. The process is simple; they build a couple, take some pictures and open a 10-20 day window for others to jump on the production run. Once they know how many to make, they get them done and move on to something else.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.
Compare With
-
As Low As $4.04
$4.49
-
As Low As $5.84
$6.49
