Miter Slot Featherboard
Two locking screws, not just one, hold this quick positioning featherboard securely in a standard 3/8" x 3/4" miter slot. The WoodRiver® Miter Slot Featherboard keeps stock tight against the fence with flexible "feathers." This design helps to prevent chatter while cutting and greatly...
Two locking screws, not just one, hold this quick positioning featherboard securely in a standard 3/8" x 3/4" miter slot. The WoodRiver® Miter Slot Featherboard keeps stock tight against the fence with flexible "feathers." This design helps to prevent chatter while cutting and greatly reduces dangerous kickback. This unit is made of sturdy plastic, measuring 3/4" T x 4-3/4" W x 6-1/4" L and has 4-1/2" of travel.
- Quick position miter slot featherboard
- Two locking screws
- Flexible feathers aid in preventing chatter while cutting
- Reduces kickback
- Product Thickness: 3/4"
- Product Width: 4-3/4"
- Product Length: 6-1/4"
- Compatibility: Fits standard 3/8" x 3/4" miter slot
- Travel: 4-1/2"
- (1) WoodRiver - Miter Slot Featherboard
Very disappointed in this Woodriver product
Yikes! I had higher expectations for Woodcraft's own brand of products. This featherboard is flimsy, feels like a toy, and like other reviewers noted, it is way too short to be useful. Spend the extra $5 and get a different brand.
Maybe ok for some applications, but too short for SawStop table saw
Too short to get close enough to the blade to be useful for my SawStop table saw for narrower cuts. Also, the "bars" which hold the board into the miter slots are plastic, and one cracked when I overtightened it. It's still usable (for when I am cutting larger widths only) but the cracked piece is an annoyance. I will replace it with an appropriately sized feather board. It never even crossed my mind that they might sell one that wouldn't even reach from the miter slot to the blade. Lesson learned.
It does its job
its a decent feather board. The only down side is it only get within 2" of my table saw blade. I was hoping that I could use it for thinner rip cuts. May try the kregg. Supposedly it covers more distance when adjusting.
Great but not much travel
On my old Delta table saw, this was my featherboard of choice, and I have some expensive ones on hand. On my new saw the slot is about a inch father away form the blade and this featherboard just doesn't reach unless there is over an inch and a have of trim being cut off. The Kreg is nearly identical but has much more travel; it's my new favorite.
Very good accessory
Very easy to use. Fits both my router table and table saw. On router table it holds stock solid to fence. Locks in very easily. Have used it on both fence and table of saw, very easy yo use.
Looks good but to short
Works real well and is easy to adjust, but it will not reach up close to the blade.
A finger saver
This product gives peace of mind and greatly reduces that "eliment of surprise" when using the table saw!
Great price for a featherboard
Works great and the price was the best around.
Great addtion to your table saw.
I gave 3 stars cause it does work but compared to the Kreg, well there is no comparison the Kreg is just a much better feather-board and I sprung for more Kreg
Does a great job at a reasonable price.
Much better one's for the money
I should have done a little more research before buying this. The miter rail on it is made of plastic. Hasn't broken yet but it's not quality in my book. The biggest problem is that fully adjusted inward toward the blade it doesn't come close to getting there so I can't use it unless I'm cutting off more than an inch. Kind of precludes "sneaking up" which is where it would be most useful. I'm sure it would be fine in other saws that have a miter closer to the blade. Mine is a Steel City 35915G.
Miter Track Wooden FeatherboardItem 163899
MilescraftItem 148420As Low As $15.29
Portable Table Saw FeatherboardItem 179010
FeatherPRO Featherboard - SingleItem 162500
True-FLEX Featherboard - 2 PackItem 839194
FeatherPRO Stackable Featherboard Kit by Bow ProductsItem 162501
Pro Magnetic Table FeatherboardItem 147527
Universal Magnetic FeatherboardItem 148442