Using the Microjig® 1/8" Side Leg accessory for the GRR-Ripper you will unlock your true potential for creating beautiful and unique details to enhance your projects without risking your safety. Make sure your next project stands out with the 1/8" Leg and the GRR-Ripper Control System. 1/8" side leg attachment easily installs to the GRR-Ripper® Basic and Advanced 3D Push Block Systems (sold separately) with included hardware, creating a 3/8" tunnel to enable table saw rips as thin as 1/8". Features: What's Included:
Microjig
Side Leg for GRR-Ripper Systems - 1/8"
Microjig
Side Leg for GRR-Ripper Systems - 1/8"
Frequently Bought Together
-
Current product. Always included in the bundle total and cannot be deselected.
MicrojigSide Leg for GRR-Ripper Systems - 1/8"$19.99 -
TitebondCold Press Veneer Glue+$13.49
Titebond
Cold Press Veneer Glue
Item #145718 Model 5175Titebond® Cold Press Veneer Glue is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. It offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and non-backed wood veneers. Set time is usually 15 minutes at room temperature, allow 24 hours full cure.Features:
- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapors
- Safe - nonflammable
Specifications:- Size: Gallon
- Type: Modified PVA Emulsion
- Color: Tan (Dries dark brown)
- Viscosity: 4,500 cps (centipoise)
- Application Temperature: Above 50°F (10°C)
- Open Assembly Time: 15 minutes (70°F / 50% RH)
- Total Assembly Time: 15-20 minutes (70°F / 50% RH)
- Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
- Required Pressure Application: 100-250 PSI, depending on substrates
- Method of Application: For most consistent coverage a mechanical spreader is recommended.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
What's Included:- (1) Titebond Cold Press Veneer Glue - Gallon
-
MicrojigGRR-Ripper Gravity Heel Accessory+$19.99
Microjig
GRR-Ripper Gravity Heel Accessory
Item #861222 Model GRGH-040The Microjig® Gravity Heel Kit adds an adjustable hook to your GRR-Ripper pushblock that grasps the tail end of your material to provide superior pushing power for ultimate control of your workpiece. The replaceable heel can be locked in position for splinter-free routing or allowed to automatically retract for gripping material in the middle like a traditional pushblock. The unique design provides extra leverage to help push through the cut and prevent blowout. Fits GRR-Ripper Model GR100 and GR200. Kit includes: three 1" Gravity Heels, two 3/4" Gravity Heels, and mounting hardware to attach to two GRR-Ripper units.Features:
- Automatically retracts mid-board, then drops into position when feeding long stock on jointers
- Locks in position to virtually eliminate tear-out on the table saw
- Adjusts to stock thickness for more controlled cuts on the bandsaw
- Increased control and stability when feeding short or long stock
- Prevents blowout during router operations and can be used as a template for repeat routing
Specifications:- Compatibility: Fits all existing GRR-Ripper push blocks
What's Included:- (3) 1" Gravity Heels
- (2) 3/4" Gravity Heels
- (2) Heel Spacers
- (2) Tool-Free Knobs
- (2) T-Bolts
- (2) Springs
-
WoodRiverEdgeband Spring Clamp - 3"+$8.99
WoodRiver
Edgeband Spring Clamp - 3"
Item #182796 Model DT62300003The WoodRiver® Edgeband Spring Clamp is a great solution for securing edging to a board you just can’t get regular bar clamps on. The large rubber faced anti-slip jaws securely grip the surfaces allowing the rubber strap to exert pressure onto the edge while the glue dries. Use it as a standard spring clamp where larger jaws are needed. This is also a handy clamp just to hold extension cords up out of the way or onto a ladder.
Features:
- Large non-marring jaw pads
- Large rubber web for edge pressure
- Sold individually
Specifications:
- Capacity: 2"
What’s Included:
- (1) WoodRiver® 3" Edgeband Spring Clamp
-
BeavercraftCarving Gloves - Medium - Pair+$12.99
Beavercraft
Carving Gloves - Medium - Pair
Item #195426 Model CRG_MBeaverCraft Cut-Resistant Medium Size Wood Carving Gloves provide a barrier of protection against hand and finger injuries resulting from knife slips when carving. Their breathable design allows airflow during extended use, helping you maintain dexterity and grip while working. Premium materials, including high-density polyethylene, polyester, and spandex, ensure reliable safety without sacrificing comfort.
Featuring a snug, form-fitting design, they mold perfectly to your hands. Additionally, they are ambidextrous, so you'll never have to worry about which hand they fit. The elastic cuff keeps them securely in place, and the convenient pull tab makes them easy to put on and take off. Cleaning is simple—just toss them in the washing machine and let them air dry.
Features:
- Cut-resistant for reliable safety
- Breathable for comfort during extended use
- Flexible and lightweight for ease of movement
- Snug fit
- Ambidextrous design fits either hand
- Secure elastic cuff keeps gloves in place
- Convenient pull tab for easy on/off
- 100% food-safe
- Machine washable for simple cleaning
Specifications:
- Size: Medium
- Materials: High-density polyethylene, polyester, spandex
- Color: Gray
What's Included:
- (1) Pair of BeaverCraft Cut-Resistant Wood Carving Gloves - Medium
Note:
- To determine the needed glove size, measure your hand's width at the fullest part without your thumb and the length of your middle finger. Use the sizing guide to select the pair that will work best for you.
