View a Larger Image of Micro-Mesh 3 x 4 Soft Touch Sanding Pads
Item 150859
Model 3MSTP6VW

Micro Mesh - Micro-Mesh 3 x 4 Soft Touch Sanding Pads



Ships on February 28, 2019 check in-store availability

Save $11 Now Through February 28, 2019

Items You May Need

Compare With


The super-fine grit of Micro-Mesh papers will give all or you projects that “wet look” finish. Foam backed ultra fine grit 3” x 4” 2-sided pads used either wet or dry will put a sheen on bare wood or a beautiful luster on finish coatings. Abrasive crystals last up to 15 times longer than normal abrasives. Kit includes on each of 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12,000 grit pads.

  • Removes heavy damage and restores approximately 15 square feet
  • Nicely fit into the hand
  • No sanding blocks required
  • Conform easily to curved surfaces
  • Have foam sandwiched between them


4.67 out of 5 stars
3 Reviews
  1. 5.0 out of 5 stars
    by on

    worked so well I bought more

    I make duck and goose calls. When the turning on the lathe is done, I sand the call with fine grit sand paper and then I use fine steel wool. After that, I use the micro mesh sand pads. Start with the courses one and go down the line to the finest grit. You will be amazed at the finish you get,I was, and if you want it to look even better, buff it on a buffing wheel.

  2. 5.0 out of 5 stars
    by on

    Create the ultimate shine!

    I finish my sanding with 800 grit sandpaper wet or dry, then start with the Micro-mesh. These work best on synthetic surfaces but also on hard, dense woods. Wet and/or dry polishing works well. I cut the 3 X 4 inch pads in half. Heat is the enemy of these pads, if you always wet sand they last for 50 or more pens. If you want a gloss finish you need to learn how to use these.

  3. 4.0 out of 5 stars
    by on

    Micro-Mesh pads work quite well for pens

    Micro-Mesh pads work very well for finishing pen blanks. I cut the 3" X 4" pads in half to use for finishing pens and the cost is a little more reasonable than buying the 2" x 2" pads. I have used these on several acrylic pens as well as some high oil content wood pens which don't require any other finish.

Top of Page