Multi-Purpose Router Table Switch
The Kreg Multi-Purpose Router Table Switch adds safety and convenience to your router table.Easily mounts to both Kreg steel stands (floor model or benchtop)Two female outlets for use with router...
You May Also Like
- Easily mounts to both Kreg steel stands (floor model or benchtop)
- Two female outlets for use with router and dust collection
- Large ON/OFF lockable paddle switch
- 125 Volt; 15 Amp; 8-foot long 14-gauge power cord
Challenge to mount
Product was excellent for providing a convenient switch to my home made router table. However, this particular switch is really intended to mount on a krieg metal stand. I had to fabricate a metal connector to be able to mount this switch on a wooden frame, the switches mounting holes were difficult to access.
You'd think these things would be tested coming out of the factory, but not this one. Great concept, and i'm returning mine to get another one, but really, it's a switch, they aren't hard to make. Great quality control.
Why not other tables???
Kreg should make the mounting bracket of the unite universal by removing the gussets from the back of the mounting bracket.
This is everything the promotion claims
The over size stop button is easy to locate under the front of the table top.
Good safety feature, convenient location
A really good addition to this Router table.
A must have for my router table.
the accessory plug in for vaccumn is a must have
Router Table Switch
I purchased this switch on the recommendation of an article in a magazine. I recommend it highly. I particularly like the rear facing, double outlet and the size of the switch paddle, large enough to use easily, but not so large as to present an obstacle to bump into.
easy install. good size paddle, works
works very well good sizs paddle
Great safety device for a router table
On/Off paddle needs to be bigger
I picked up this switch for my new Freud router/table combo (that comes without a much needed switch). While this Kreg switch is intended for use in their router tables that are pre-drilled to accept this, I had no problems drilling two holes in the metal leg of my Freud table. The two outlets on this are great! I plugged in both the router and my vacuum, and when I switch on the unit, both are working. I'm thinking about getting another switch for my tool bench so that I can do similiar functions with other tools. Highly recommended.