Jointer Blade Hone, Diamond
Keep your jointer and planer knives razor sharp and knick-free without ever removing them from the cutterhead! Simply unplug your machine, lock the cutterhead in position, align the 4" hone on the...
- Diamond jointer blade hone
- 300- and 600-grit surfaces may be used dry or with water lubrication
- Keep jointer and planer knives sharp without removing them from cutterhead
- Aluminum oxide version also available (Woodcraft #09T14)
- Not recommended for portable planers with disposable knives
A few tips could make it mueasier to use
This product looks like it should be very easy to use, but there are NO instructions included at all. Not wanting to ruin my knives I would appreciate at least knowing which grit is installed as received as I think one bar could be 400, the other 600, but I'm not sure. A picture of what the blade profile should like would be very helpful. I can't believe someone at the factory couldn't write up a short list of tips on how to use this thing. I would probably recommend this to a friend if a few clear directions were provided to make using it easier.
I had a small nick on my 8" jointer and this helped cure it.
Really does the job quick
When my planer started showing signs of dull blades, I just removed the cover and ran the hone over the blade about twenty times on each side and was back in business in no time. Much easier than removing the blades.
This is a very good tool.
It works very well
not quite what i was hoping for
wanted something to sharpen my jointer blades.dosent work to my expectations