These premium inlay bandings are chosen by the demanding professionals to add a distinctive touch to furniture, boxes, and restoration pieces. Quality construction aids installation and reduces time in the finish room. Installation is easy: simply rout a groove to the proper width and...
Details
These premium inlay bandings are chosen by the demanding professionals to add a distinctive touch to furniture, boxes, and restoration pieces. Quality construction aids installation and reduces time in the finish room. Installation is easy: simply rout a groove to the proper width and depth with a straight cut router bit and glue the banding in place. Made in the USA from domestic and exotic woods. In your choice of widths from 1/8" to 1/2" wide, 36" long, approximately 1/28" thickness.
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
- Inlay adds a distinctive touch
- Use in furniture, boxes and restoration pieces
- Easy to install
- Domestic and exotic wood
- Made in the USA
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
Reviews
1 Review
-
Not exactly what I expected
Hard to cut miters that make good(i.e, 'pretty') corners. The design is a bit too busy for what I wanted, but the quality was pretty good. Very uniform width. It seemed a little of the dark dye had bled over into the light colored wood.