General Finishes

Details

General Finishes® Gel Stains are quite possibly the easiest of all finishes to use and achieve a "hand-rubbed" look without all the work. Application is easy with a foam brush or lint free cloth. The heavy bodied gel formulation permits the product to flow out evenly (no drips or runs) preventing uneven penetration for consistent color control. Combined with no sanding (your choice to sand or not) between coats and a quick “re-coat” time, you’ll be finished sooner with less effort and better results than ever before.

Features:

Easy-to-use stains simply wipe on with a cloth or applied with a foam brush (no spills or splashes)
Heavy-bodied, and so does not penetrate as deeply into the wood as liquid oil-base stains do
This is the stain that has the most "finishing feel" of all General Finishes' products
Woodworkers love the lustrous finish of final product
Gives a more even appearance on hard-to-stain woods like pine, aspen, maple and cherry
Great adhesion on raw wood, existing finishes, fiberglass and steel doors

Specifications:

Color: Gray
Size: Pint
Type: Oil based pigmented stain
Interior/Exterior Use: Rated for interior use only
Coats: 1+ coats (additional coats can deepen the color of the stain)
Recommended Use: Interior raw wood surfaces such as cabinets, trim, doors and furniture
Application Method: Brush, roll, wipe, pad applicator
Clean-Up: Mineral Spirits
VOC: <560 g/L
Coverage: 75-100 sq.ft.
Ideal Drying Conditions: 70° F and 50% humidity, out of direct sunlight, with good air movement
Dry Time - Touch: Raw wood (8+ hr), existing finish wipe-off (12-24+ hr)
Dry Time - Recoat: Raw wood (12-24 hr), existing finish wipe-off (72+ hr)
Dry Time - Recoat - Applied Over Water Based Product: 72 hr

What's Included: