Forrest - WW10401125 Woodworker II #1 Grind Saw Blade 10" x #1 x 40 Tooth
The #1 Grind is a custom version of our top selling Woodworker II blade from Forrest Manufacturing. It produces a square, flat bottomed cut for box joints, splines, keyways, drawer bottom grooves...
Item 816352Model WW10407100
Item 85N52Model WW10407125
Item 153696Model WW10401100
Item 148959Model WW10206125
Item 825270Model LU80R010
Item 171601Model 90130501
Item 85N53Model WW 10-30-7-125 -5/8"
Item 420744Model WW12487125A
Item 943304Model DH10807125
- Long life micro-grain carbide teeth
- 5/8" arbor hole
- .125 kerf
- 10" 40 tooth
- #1 grind
Articles & Blogs
The newest blade from Forrest Manufacturing is the 10″ Ply Veneer Worker with 70 Teeth, and is specifically designed to work with man-made materials in the plywood, vinyl clad, composite and veneer arena. Each tip is made from super hard, long life micro-grain carbide, and the ATB (35° Alternate Top Bevel) produces the smoothest cut ever seen in a hand-straightened saw blade. The 10° face hook allows for easier feed on table saws, and sides are chamfered to eliminate heat buildup and chip clearing. This thin (3/32″) kerf blade is 10″ in diameter and has a 5/8″ arbor. This blade is also available in standard (1/8″) kerf. For use on table saws and saws with slides. Made in the USA.
A very specific purpose
The standard WW II blade has some great versatility, but with that raker tooth, some of this is lost. It is a very good blade for cutting box joints and other flat bottom, non-thru cuts.
Woodworker II Should be Woodworker #1
I have been a woodworker for over 20 years and have always used the same brand blades that my Grandfather, who was a woodworker as well used. until I found myself in a pinch when I took these blades to a new sharpener and they were destroyed as he ground all the carbide off them rendering them useless. So I need some new blades right away and went to the local Woodworking supply store and picked up a Woodworker II blade. I was very impressed by how blade riped through tiger maple for our Queen Anne Highboy like nothing first day over 150 bd. ft. of 4/4 maple. It has since cut many more hundred bd. ft. of lumber and is still sharp. It leaves a mirror finish during cross cutting. The one we got has only a .001 run out and is in our opinion a blade for serious woodworkers I will be using Forrest products from now on. Bubbadovetail MI.
Woodworker II #1 grind 10
I bought this #1 grind blade becuase it leaves a cut that is flat on the bottom. I use only Forrest blades and this one is up to their usual high standards. The only minor problem with this blade is that it leaves a slight edge roughness on the bottom of the cut.
Nice specialty blade
A very specialized blade, but when you need a flat bottomed groove 1/8" wide, it can't be beat.
The best saw, 1AAA !!!
Used for my daughter furniture, the best product !!!
finest saw blade I have ever used
I cut a lot of domestic and exotic hardwoods and this blade flys through it.