The SYS-AIR Air Filter effectively captures airborne dust that professional extraction may miss, helping to prevent it from settling on surfaces. Its compact Systainer design and lightweight build make it ideal for mobile use. Equipped with a powerful two-stage filter system, it effectively captures even the finest dust particles, preventing contamination and improving the air you breathe. The result? Less cleanup, a cleaner workspace, and noticeably better air quality.

• Compact and lightweight—only 22 lb (10 kg)
• Comes in a convenient Systainer³ M437 format
• Powerful air filtering up to 423 cfm (720 m3/h) (non-HEPA)
• Effectively cleans the air in rooms up to 1,057 ft² (98 m²), achieving three complete air changes per hour
• Two airflow levels based on dust levels in the environment
• Disperses upwards in three directions (left, right and back), minimizing dust disturbance and creating fewer disruptive air currents
• Preliminary filter captures most dust particles to protect the main filter
• Features a specially designed Triple-V main filter with a large surface area, reducing clogging and extending its lifespan
• Provides over 99.9% filtration for cleaner air
• Filters are easy to replace and cost-effective
• Alerts you when filters are clogged or need replacing
• Includes a port for connecting a 7-7/8" (200 mm) air supply hose (accessory) for hard-to-reach areas or dust protection barriers
• Connects easily to Systainers and extractors via T-LOC, and can be integrated into Systainer Systems vehicle racking systems
• Readily portable with the Systainer handle and simple to transport when paired with the SYS-RB cart or extractor
• The power cord stows neatly in the lid compartment

• Power Consumption: 200 watt
• Max. Volume Flow: 423 cfm (720 m³/h)
• Filter Surface of Preliminary Filter: 1332 in2 (8,600 cm2)
• Filter Surface of Main Filter: 3,812 in2 (24,600 cm2)
• Cable Length: 9.8 ft (3.0 m)
• Dimensions: (L x W x H) 15.6" (396 mm) x 11.6" (296 mm) x 17.2" (437 mm)
• Noise level: 55 - 65 dB
• Weight: 21.82 lb (10.2 kg)

• (1) SYS-AIR Air Filter
• (1) Preliminary Filter VF-SYS-AIR
• (1) Main Filter HF-SYS-AIR

FAQs

How effective is it at removing fine airborne dust?

The SYS‑AIR is designed to capture fine airborne dust that tool‑connected extraction can miss. It uses a two‑stage filtration system (a preliminary filter plus a high‑efficiency main filter; HEPA on the HEPA version) and is rated to remove over 99.9 percent of fine dust particles, helping prevent dust from lingering in the air and settling on surfaces.

Can it be used alongside a CT dust extractor?
Yes. The SYS‑AIR is intended to complement CT dust extractors, not replace them. While CT extractors capture dust at the tool, the SYS‑AIR continuously filters residual airborne dust in the room, and it can be stacked or connected with CT extractors via the T‑LOC system for a combined setup.

Can it run continuously, or does it have auto/timer modes?

The SYS‑AIR is designed for continuous operation and offers two selectable airflow levels depending on dust load. It does not include automatic start, tool‑triggered operation, or timer modes; it is turned on and off manually and runs as long as needed for air cleaning.