WoodRiver Dust Connection - Dust Collection Fitting, Blast Gate, Aluminum, 2-1/2" OD
These economical fittings will help you build a high performance dust extraction system for your shop. Made of ABS plastic (except for the aluminum blast gates), these fittings are designed to...
Item 149576Model YW1104
Item 85O06Model YW1007
Item 128747Model YW1030
Item 85O07Model YW1021
Item 173017Model YW1138
Item 162297Model YW1085
Item 162292Model YW1008
Item 162293Model YW1084
Item 149577Model YW1099
Item 162300Model YW1128
- Dust Collection Fitting, Blast Gate, Aluminum, 2-1/2" OD
- Stands up to years of rugged use
- Aluminum Construction with Steel Gate
- Abrasion Resistant
When gate is opened it leaves a very large gap at the bottom end of the housing. Almost 20% of the suction is lost.
Gate won't close all the way..
I had to gring the gate so that it would close all the way. Now they are working fine.
A vast improvement over ABS blast gates
The anti clog design eliminates all the time I spent clearing my ABS gates. I switched all my 4" gates out months ago and was pleased to finally find a 2 1/2" aluminum gate.
Does the Job
The blast gate is well made with an aluminum body and sheet metal slide. The flanges fit 2-1/2" hoses and used with a metal hose clamp seal very well. The edges of the slide are slightly sharp, but a couple of minutes with a file cured that issue.