Achieve complete evacuation of air around material inside vacuum bags.Use breather fabric over the top of the piece being laminated to ensure complete air flow over the entire part. Typically, when drawing a vacuum, the tendency of the bag is to seal around the edge of the part first which reduces or stops the air flow over the entire surface of the part. The result is that you can have less pressure in the center of the part than around the edges; this can force the adhesive toward the center of the part, causing the part to not be totally flat or in a worst case, incomplete lamination of the center area. It is recommended to use a thin film of polyethylene between the part and the breather fabric to prevent the adhesive from contacting the breather fabric. It also helps keep your bag free of adhesive. If kept clean, the breather fabric is reusable.
Shipping / Billing Information
This product ships direct from the manufacturer:
- Your order will ship in approximately 2-4 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. After 30 days, you will be charged a 25% restock fee. Customer pays return freight. When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
One year replacement for defective product. Please contact Vac-U-Clamp with warranty issues @ 888-342-8262.