2-1/2" HD Caster - Double Locking - Swiveling - 4 Hole Mounting Plate
Put your entire shop on wheels with WoodRiver® Heavy-Duty Casters! Easy rolling, non-marring, polyurethane tires will not "flat spot" during long periods of remaining stationary. Swivel and wheel ride on ball bearings for smooth rolling and turning. Double brake locks both wheel and...
Put your entire shop on wheels with WoodRiver® Heavy-Duty Casters! Easy rolling, non-marring, polyurethane tires will not "flat spot" during long periods of remaining stationary. Swivel and wheel ride on ball bearings for smooth rolling and turning. Double brake locks both wheel and swivel rotation with the touch of a toe. Unlike cheaper casters, which only lock the wheel and allow the supported load to move around as the caster rotates on its base, these provide a rock solid base.
- Double locking
- Double brake locks both wheel and swivel rotation with the touch of a toe
- 132 lb. load rating for each caster
- 4 Hole mounting plate
- Caster Size: 2-1/2"
- Caster Height: 3-3/8"
- Tire Material: Polyurethane
- Load Rating (for each caster): 132 lb.
- Plate Size: 2-3/8" W x 2-7/8" L
- Distance Between Holes: 1-5/8" x 2-1/8" center to center
- (1) 2-1/2" Heavy-Duty Caster - Non-locking - Non-swiveling - 4 Hole Mounting Plate
Articles & Blogs
2-1/2" Caster, Double Lock
I have a small woodworking shop (24' X 12") and it was necessary to put casters on four of my tools (planer, scroll saw, router table, etc)so I would have more room to work. The casters are very easy to install and they work just fine.
I would buy this product again.
Use for moving heavy object. It's easy to move around and strong and able to lock the wheels in place.
asters for tool trunk
I haven't put them on the chest yet but they seem well built
I WOULD BUY THIS PRODUCT FOR MY OTHER PROJECT THAT I HAVE BUILT FOR MY WOODWORKING SHOP.
I buy these casters for most of my jobs
These casters carry the load and work great, they give you great movement in tight places.
gets the job done
when in lock it stays there
This not only locks rolling but it also locks the pivoting of the wheel.
Wheel lock is very weak
Mounted two of these and two non locking versions on a table I built for my new Delta Lathe. Rolls great, but the two locking wheels allow the table to roll with almost no resistance.Looks like to me the metal plate that pushes against the tread of the wheel was poorly manufactured. Other than that a great caster.