Features: What's Included: (1) 7mm pen twist Mechanism - 5 Piece
Woodcraft
7 mm Pen Twist Mechanism - 5-Piece
Woodcraft
7 mm Pen Twist Mechanism - 5-Piece
Frequently Bought Together
-
Current product. Always included in the bundle total and cannot be deselected.
Woodcraft7 mm Pen Twist Mechanism - 5-Piece$18.99 -
WoodRiverPen Turning Mandrel+$17.99
WoodRiver® Economical Pen Turning Mandrel allows you to switch between small turning projects of any length with a simple loosening and tightening of a nut. The economical pen turner's mandrel is self-centering ensuring no more off-center turnings and/or spacers for short length projects. A totally new concept, this mandrel features a collet that ensures that the shaft is always exactly centered on your lathe. Because the collet body is hollow, the amount of mandrel shaft extending from the collet can be varied for turning everything from key chains to larger pens. The locking nut and collet work like the collet in your router, just loosen the nut and slide the shaft in or out to the length you need, then tighten. The small end of the collet body features a 5/16" thread that allows you to pass a bolt through your headstock and, with the mandrel shaft removed, the collet assembly can be used as a 1/4" collet chuck!
Features:
- Precision machined economical pen turning mandrel eliminates off-center turning
- Turn two barrels at once, or single barrels up to 6'' long
- Collet chuck action
- Easily tighten with knurled nut
- Collet assembly can be used as a 1/4" collet chuck
- Adjustable mandrel can be used to turn a single pen section and avoid harmonic vibrations
Specifications:
- Morse Taper: #2
What's Included:
- (1) 1/4" collet
- (1) Collet nut
- (1) Mandrel shaft with washer and nut
Notes:
- Bushing sets must be purchased separately
-
TitebondII Premium Wood Glue+$4.49
Titebond® II Premium Wood Glue is the first one-part glue to pass the test for the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Titebond II cleans up with water – use a damp cloth while glue is wet. Scrape off and sand dried excess.
Features:- First one-part wood glue to pass the ANSI Type II Water Resistance testing
- Designed for exterior use
- Easy to apply with bottle (for fine application), roller spreader or brush
- Excellent sandability
- Unaffected by finishes
- FDA approved for indirect food contact
- Easy cleanup with water
Specifications:
- Application Temperature: Above 55°F
- Open Assembly Time: 3-5 minutes (70°F/50% RH)
- Total Assembly Time: 10-15 minutes (70°F/50% RH)
- Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
- Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 PSI for softwoods, 125-175 PSI for medium woods and 175-250 PSI for hardwoods)
What’s Included:
- (1) Titebond® II Premium Wood Glue – 16 oz
Notes:
- Not for continuous submersion or for use below the waterline.
- Not for structural or load bearing applications.
- Due to low pH, product may cause corrosion on metal surfaces; test product before using where rusting/corrosion may be a concern.
- Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken – agitation should restore product to original form.
- Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, contact the Woodcraft Technical Support Team at 1-800-347-4583.
Read Material Safety Data Sheet (MSDS) before use. Keep from Freezing. KEEP OUT OF THE REACH OF CHILDREN.
7 mm Pen Twist Mechanism - 5-Piece
by Woodcraft