3347 Locking Drawer Glue Joint Router Bit 1/2" SH 1" D X 1/2" CL X 2-1/8" OL
$36.08
One bit makes both cuts. Carbide tipped router bits. Material thickness 1/2" - 5/8".D = Diameter; CL = Cutting Length; R = Radius; SH = Shank Diameter; OL = Overall Length.Note: Products labeled...
You May Also Like
Details
D = Diameter; CL = Cutting Length; R = Radius; SH = Shank Diameter; OL = Overall Length.
Note: Products labeled "Ships Direct from Manufacturer" are shipped directly from the manufacturer, whose warranty supercedes any offered by Woodcraft. In-stock product will ship within 5 business days. All returns after 30 days are subject to a 25% restocking fee. For details, click on the "Ships Direct From Manufacturer" link below.
Shipping / Billing Information
This product ships direct from the manufacturer:
- Your order will ship in approximately 2-4 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Return Information
Returns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
Warranty Information
Because this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.
Whiteside Product Guarantee:
All Whiteside tools are warranted to be free from defects in workmanship & materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.
Reviews
-
very good
It worked just fine. it made the cuts I wanted it to do.
-
Another excellent Whiteside product
If you are looking at this bit, you probably already know about Whiteside quality. What I really love about this is how easy it is to use in a router table. My router table is as simple as it gets: a plywood board with the router mounted underneath. I use a straight Oak board for a fence and clamp that to the table. Despite this low-tech cheapo set-up, this bit produces superb cut quality. The resulting glue-joint makes carcass assembly MUCH easier. Everything seems to 'click' into place and stay there politely while I get clamps on. This precision-engineered bit is definitely worth the money and then some.One important tip here: it REALLY helps to use a zero-clearance fence-board. It only takes a minute to do and DRAMATICALLY reduces tear-out at the cut-exit, especially in chip-prone material like Birch plywood.[...]
