Frequently Bought Together

• Current product. Always included in the bundle total and cannot be deselected.

  

  Veritas

  Narrow Honing Guide Head Only

  $61.99
• 

  WoodRiver

  Honing Guide

  +$19.99
  

  WoodRiver

  Honing Guide

  Item #03A21 Model MJ-817A

  More Info

  You can hone edged tools between grindings with this unique self-centering guide from Chisels and plane irons from 1/16" to 2-5/8" wide can be held securely in one of the two sets of stepped jaws. The accurately ground hardened steel roller glides across the surface of the stone to allow for a consistently fine edge.
  

  Features:
  

  • Hone edge tools between grindings with this unique self-centering guide

  • Chisels and plane irons from 1/16" to 2-5/8" wide can be held securely

  • Two tier design to accommodate narrow chisels and wider plane blades

  • Hardened steel roller glides

  Specifications:

  • Tool Capacity: Holds chisels and plane irons from 1/16" to 2-5/8" wide.

  • Guide Type: Self-centering honing guide.

  • Jaw Design: Two sets of stepped jaws
    

  What's Included:

  • (1) WoodRiver Honing Guide

  • (1) Complete instructions

  FAQs

  
  Does it work with beveled-edge chisels, Japanese chisels, and thicker plane irons?

  
  Yes, the honing guide is designed to accommodate a variety of blade types, including beveled-edge chisels and many plane irons. Compatibility with thicker or specialty tools may vary slightly depending on size.

  
  Is there an included angle-setting jig or chart?

  
  This guide typically does not include a built-in angle-setting jig, so angles are set manually. Many users rely on simple setups or reference charts for consistency.

  
  Will this work on diamond stones, waterstones, and oil stones?

  
  Yes, it works well on diamond stones, waterstones, and oil stones. The design allows for smooth, stable movement across different sharpening surfaces.

• 

  Veritas

  MK II Honing Guide

  +$89.00
  

  Veritas

  MK II Honing Guide

  Item #833173 Model 05M0901

  More Info

  The key to consistent and fast honing is repeatability - whether you are a sharpening veteran or just starting out, the Veritas® Mk. II lets you concentrate on sharpening without worrying about controlling the blade angle at the same time. This makes your honing reliable, accurate and consistent. The Mk. II will set bevel angles from 15° to 54° and back bevels from 10° to 20°, and it will accommodate blades from 1/2" to 2-7/8" in width. Included is a blade registration jig which slides onto the guide body, centering and squaring the blade with the integral fence ensuring accuracy. Blade stop with discrete positions for preset bevels and three-position eccentric roller allows you to hone micro bevels quickly and accurately with a simple turn of a knob.

  
  

  Features:
  

  • Accurate and repeatable results
  • Blade-registration jig slides onto guide body, centering and squaring blade using integral fence
  • Blade stop has discrete positions for preset bevels
  • Three-position eccentric roller that allows you to hone micro bevels quickly and accurately with a simple turn of a knob
  • Manufactured from die-cast zinc with precision machined brass and steel parts
  • Made in Canada

  Specifications:

  • Blade Width: Accommodates blades from 1/2" to 2-7/8" in width and up to 15/32" thick
  • Bevel Angles: Reproduces bevels from 15° to 54°
  • Back Bevel Angles: 10° to 20°

  What's Included:

  • (1) Veritas - Mk.II Standard Honing Guide includes the standard clamping head, straight roller base and angle registration jig

  FAQs

  
  How accurate and repeatable is the angle-setting jig?

  
  The Mk.II honing guide features a highly accurate angle-setting jig that allows for consistent, repeatable sharpening results. It’s designed to take the guesswork out of maintaining precise bevel angles.

  
  What is the maximum blade width this guide can accommodate?

  
  The guide can accommodate a wide range of blade widths, typically up to about 2-7/8" depending on the configuration. It’s suitable for most common chisels and plane irons.

• 

  Veritas

  Camber Roller for Mark II Honing Guide

  +$34.99
  

  Veritas

  Camber Roller for Mark II Honing Guide

  Item #836930 Model 05M0905

  More Info

  On smoothing planes, it’s desirable to hone a slight curve into the edge of the blade to eliminate blade tracks in the piece of wood being planed. The Veritas® Camber Roller Assembly has a barrel shaped roller that permits a limited rocking of the blade while still maintaining an accurate consistent bevel. Simply replace the roller on the Mk. II Honing Guide with the camber roller; that’s it! Setup is still done using the Mk. II’s registration jig, plus the camber roller includes a standard eccentric system for honing micro bevels.
  

  • Accurately camber smoothing plane blades
  • Fast and accurate
  • Easy to use

  
  
• 

  Veritas

  Narrow Blade Honing Guide

  +$119.00
  

  Veritas

  Narrow Blade Honing Guide

  Item #160874 Model 05M0910

  More Info

  The Veritas® Narrow-Blade Honing Guide consists of the narrow-blade clamping head, the standard Mk.II roller base and the angle registration jig. Veritas designed the jig for those who primarily sharpen chisels. Whether they’re beveled or square edged, the chisel blades are kept centered and tight to the reference face of the jig plate by parallel, canted jaws to ensure a precise cutting edge every time. The jig will handle blades from 1/8" to 1-1/2" wide, bevel-edged chisels up to 15/32" thick, and square-edged chisels up to 11/32" thick, and it hones bevel angles from 15° to 40° and back bevels from 10° to 20°. Complete instructions are included.

  • Venerable Mk.II based design ensures precision
  • Narrow-blade honing guide for chisels
  • Accept blades from 1/8" to 1-1/2" wide
• 

  Veritas

  Deluxe Honing Guide

  +$169.00
  

  Veritas

  Deluxe Honing Guide

  Item #160876 Model 05M0920

  More Info

  One of the most popular honing guides around, the Veritas® Mk.II is now available in a Deluxe Set, which includes the Standard and Narrow-Blade Heads as well as the Angle Registration Jig, a Straight Roller Base and a Camber Roller Base. The Narrow-Blade Head will handle blades from 1/8" to 1-1/2" wide, bevel-edged chisels up 15/32" thick, and square-edged chisels up to 11/32" thick, and it will hone bevel angles from 15° to 40° and back bevels from 10° to 20°. The Standard Head will handle blades from 1/2" to 2-7/8" wide, and it will hone bevel angles from 15° to 54° and back bevels from 10° to 20°. The Straight and Camber Rollers attach to the clamping heads via a single thumbscrew and feature an eccentric axle mount permitting a precise micro bevel to be added to any angle with the simple turn of a knob. The wide Straight Roller provides a stable base that ensures accurate results, and the Barrel Shaped Roller lets you camber plane blades, thus helping to eliminate plane tracks. Complete instructions are included.

  • Venerable Mk.II based design ensures precision
  • Includes both Standard and Narrow-Blade Heads
  • Accepts blades from 1/8" to 2-7/8" wide
• 

  WoodRiver

  Premium Honing Guide

  +$79.99
  

  WoodRiver

  Premium Honing Guide

  Item #182068 Model WRES01

  More Info

  The WoodRiver® Premium Honing Guide is not just another familiar “face.” Subtle design features set this jig apart, including solidly constructed, black anodized precision machined aluminum jaws, stainless steel guide rods and an adjustment screw with a phosphor bronze bushing in a stainless steel roller bearing to reduce friction and maintain accuracy. Also, the blade/chisel is held tight to the guide rods by tightening the angled jaw faces against the tool edges. Guide holds bevel edge or standard bench chisels and plane irons from 1/4" to 2-3/4" wide. Use the included projection block to properly set your blade for the desired sharpening angle.
  

  Features:
  

  
  

  • Includes a projection block to help accurately set your blade angle
  • Black anodized precision machined jaws
  • Stainless steel guide rods
  • Phosphor bronze bushing in a stainless steel roller bearing

  
  

  Specifications:
  

  • Holds bevel edge or standard bench chisels and plane irons from 1/4" to 2-3/4" wide

  
  

  What's Included:
  

  • (1) Premium Honing Guide