Timber Wolf - Bandsaw Blade 80" x 1/2" x 3 TPI Positive Claw
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less...
Item 144705Model PSW80124
Item 859672Model PSW115123PC
Item 140192Model PSW13313
Item 830096Model PSW14213
Item 159248Model PSW15313
Item 140811Model PSW80144
Item 834014Model PSW133123
Item 141080Model PSW82123
Item 830599Model PSW13713
Item 140184Model PSW105123
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!
- High silicon, low carbide steel
- Runs cooler and lasts longer
- Ideal for resawing thick stock
- Runs under low tension which requires less horsepower
- Thin kerf
Articles & Blogs
Got this blade to replace the smaller one that I had broken. My old blade was only 1/4" blade. I was trying to cut a piece old 30 year old Walnut when the blade jammed. I had to break it to free it. Cut the same piece of Walnut with this blade. "WOW". Couldn't even tell it was that hard. This is a great blade indeed.
I got this blade to replace a broken one. Trying to cut 4" thick 30 year old Walnut with my old blade and it jammed. Had to break it to get it out of the wood. Got this one installed and started to cut through the same piece of wood, "WOW". I was able to free hand a resaw cut without any hangups. This blade didn't even strain. Great saw blade.
I would buy this blade again, good blade
I have had A band saw for many years, This blade last and out cuts any blade I have ever had.
a very good blade
WOW! I bought a 20+ year old Craftsman 1/2hp bandsaw off [@] and needed a new blade. I had hoped to do some resawing, but wasn't sure my old used saw would be up to the task. I bought this blade and installed it on the saw and it resaws oak and cherry like butter! No burning, cuts fast and straight. Saw marks are planed out with one pass through the planer. You won't be disappointed with this blade.