Timber Wolf
Bandsaw Blade - 105" x 1/2" x 4 TPI - Positive Claw
$45.99
Timber Wolf® makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a...
Details
Timber Wolf® makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood cutting blade was meant to be. Blade has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the 6.5° rake angle, 5-tooth set pattern and .025" thick thin-kerf blade and you have an excellent bandsaw blade!
Features:
- Ideal for ripping and crosscutting
- High silicon, low carbide steel
- Runs cooler and lasts longer
- Ideal for thin stock wood
- Runs under low tension which requires less horsepower
- Thin kerf
- Blade Length: 105"
- Blade Width: 1/2"
- Blade Thickness: 0.025" thin-kerf
- Teeth Per Inch: 4 TPI
- Tooth Design: Positive Claw
- Kerf: .042"
- Tooth Hook Angle: 6.5°
- Tooth Set Pattern: 5 Raker Set
- Radius of Cut: 2-1/2"
- Depth of Cut Range (Hardwood): 2-1/2” -6"
- Depth of Cut Range (Softwood): 1-1/2” - 4"
- (1) Timber Wolf® - Bandsaw Blade - 105" x 1/2" x 4 TPI - Positive Claw
Articles & Blogs

Check out the Timber Wolf Bandsaw Blades
Timber Wolf Bandsaw Blades are not your typical Bandsaw Blades.
Reviews
-
Great resawing blade
Used this blade with my Grizzly G0555 with riser block. It cut 3/16" thick slices from 8" wide mahogany like a knife through butter. Same results with 8" curly cherry. Light planing needed to remove saw marks, but this is expected. Moving the stock through slower helped minimize them. Much less tension means my saw's bearings will last longer. Great blade!
-
My favorite brand of band saw blade.
After using other brands over the years, (24 to be exact), Timber Wolf has become my band saw blade of choice. Can't live/work without them.
-
Works great!
Bought this to resaw some 8"-10" walnut. It has performed as advertised, I am very satisfied.
-
smooth cutting, slightly misaligned weld
The blade moves very slightly front to back while spinning due to the weld not being perfectly 90 degrees, but this does not seem to affect the cut. Very smooth cutting and very fast. Much lower tension needed. Far superior cutting to the blade that came with the saw (Grizzly).
Compare With
-
$52.99
-
$46.99