WoodRiver - T" Wrench for 1/4"-20 Inserts
This "T" Wrench is used to manually install a 1/4"-20 threaded insert straight and easy without damaging wood or fastener. It is 3-1/2" long with a 3" handle."T" Wrench to install a 1/4"-20...
You May Also Like
Item 159282Model 159282
Item 163128Model Connector Bolt 1-1/8
Item 163130Model Connector Bolt 3in 8
- "T" Wrench to install a 1/4"-20 threaded insert
- 3-1/2" long
- 3" handle
- Installs straight without damaging wood or fastener
Instructions / MSDS
T" Wrench for 1/4"-20 Inserts
This product works well, however the manufacture should dip the handle in rubber to make it more comfortable to use.
Spraying a little WD-40 on T-Wrench
Spray WD-40 on T-Wrench threads to help from backing the insert out when removing the T-Wrench from inserted insert.
Do it right with this tool
This is way better than putting them in with a screwdriver. The best part about it is using it with the drill guide they sell here: Drill the hole with the guide, then use the 5/16ths guide the screw the insert in straight
"this is a great little tool"
This little tool makes installing inserts a snap. It is so simple it works the first and every time. I would like to see a rubber coating on the handle just for the feel in you'r hand.
The tool worked good getting the inserts properly into the wood. The only negative was that on one of the inserts the tool and the insert were tight against each other and when I went to remove the tool the insert also backed out.