California Air Tools - Pressure Pot for Resin Casting
California Air Tools® designed and built this 365CW Pressure Pot for Resin Casting exclusively for Woodcraft Supply. Use it to safely create 100% bubble-free castings, as well as, when casting...
Item 180157Model ST439R
Item 174876Model AL31009-15G
Item 870153Model 10041
Item 167942Model 10141
Item 169314Model 0570k46
Item 167178Model KBMD
- Heavy-duty pressure pot
- Teflon® coated steel tank for easy cleanup
- Removable casters for added stability
- Ready to use right out of the box (simply install casters)
- SAFELY create 100% bubble-free castings
- Air hose inlet is a 1/4" connection.
- Tank exterior dimensions: 16-1/4" W x 24-7/8" H
- Tank interior dimensions: 12-3/8" W x 14" H
- Maximum operating pressure: 60 PSI
- Equipped with safety relief valve
- Maximum tank pressure: 80 PSI
- Capacity: 5-gallon
Articles & Blogs
California Air Tools designed and built this 365CW Pressure Pot for Resin Casting exclusively for Woodcraft Supply.
Incorporating resins and epoxies into woodworking is becoming more and more prominent. But how do you know which type to use for your project? How do you mix it? How do you make a mold? Woodcraft is here with all the answers you need to create your own one-of-a-kind turning blanks, river tables and more!
Creative people are discovering the fun in using resin to create turning blanks, item encapsulations, bowls, river tables and more. To meet their project needs, Woodcraft continues to expand its line of resins and related products – and to encourage these makers Woodcraft will be sponsoring a contest in March.
More than 500 entries were received in Woodcraft’s “Pour to Win” Contest, with resin artists from California and Kentucky taking the top prizes. Click here to read more and be inspired!
I am new to resin casting and was a little put off by modifying a pressure pot. I saved a few more months and was able to get this pot, ready to go out of box, with free shipping. It may have cost me a bit more, but the results were incredible. Opened box, attached casters and was ready to go. First castings (pen blanks) came out perfectly. An awesome addition to the shop. Highly recommend it.
I don't often cast, but when I do, I choose California Air Tools, Stay Safe my Friends!
Disclaimer: I bought my California Air Tools pressure pot elsewhere, either before Woodcraft sold them or I wasn't aware they did. 🤦♂️ And I paid closer to $300 after S/H, no regrets. Just would rather have bought mine at WOODCRAFT for $224.99+S/H 🤷♂ I Chose to buy my pressure pot from a company that builds pressure pots and compressors for commercial use as their main business. My reasoning was a company that is dedicated to making only pressure handling equipment would most likely have a higher build quality which I believed would also translate to a more reliable and safer pressure vessel. So far, I have not been disappointed. Many opt to cut cost and get a 2 ½ gal from a well know discount retailer for about $99.99. The cost is affordable, and size is great for most castings, all this makes it a “too good to pass up” deal, right? Well, it does have one minor flaw, SAFETY! Please do not underestimate this, the quite common practice of converting these low-cost pressure pots to casting pots just isn’t worth the price you would pay if it were to FAIL! Many people must use wrenches to tighten the lids or add vise grips on the lid in between the locking bolts because the lids are not built ridged or strong enough to seal properly on their own. The California Air Tools pressure pots can be “hand” tightened easily to hold 50psig overnight, and then after depressuring, easily opened by hand. Some say the wingnuts are oversized, they are not, they are “properly” sized, get it? The company that builds these just builds them properly. And you only need 35psig for Alumilite Clear, that is it, any more is over kill. Stay safe my friends!