Frequently Bought Together

• Current product. Always included in the bundle total and cannot be deselected.

  

  Oneway

  Wolverine Flat Tool Sharpening Platform Kit

  $68.99
• 

  Oneway

  Wolverine Grinding Jig

  +$103.99
  

  Oneway

  Wolverine Grinding Jig

  Item #125676 Model 2291

  More Info

  Wolverine Grinding Jig will save you time, frustration and money by allowing you to grind tools right the first time and every time. You'll create accurate cutting angles and straight edges in a fraction of the time it now takes and your tools will be easier and safer to work with! The Wolverine System is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups. Each base accepts either sliding arm. Arms are effortlessly adjusted or secured by a cam locking device. The “V” arm attachment is 27" in length and is perfect for sharpening gouges, skews, chisels, or carving tools. Just pull the arm out until the tool rests on the wheel at the proper angle and you're ready to start. The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers. Wolverine comes complete with instructions for installation and use.
  

  Features:
  

  • Ideal for sharpening gouges, chisels, scrapers, parting tools, skews and carving tools
  • Save time, money, and frustration
  • Can be used with most shop grinders
  • Furnished with two bases
  • The "V" arm attachment is 27" in length
  • Platform jig uses quick release ratchet handles

  What's Included:

  • (2) Grinding Bases
  • (1) "V" Arm Attachment
  • (1) 3" x 5" Platform Jig
  • (1) Instructions for installation and use

  FAQs

  
  Will this jig sharpen spindle gouges, scrapers, and skews?

  
  Yes, the Wolverine Grinding Jig is designed to handle spindle gouges, scrapers, skews, and other common turning tools. It’s a versatile solution for sharpening a wide range of profiles.

  
  How far should the base be mounted from the grinding wheel?

  
  The base is typically mounted about 6 to 6-1/2 inches from the grinding wheel, but this can vary slightly depending on your grinder setup. Following the manufacturer’s guidelines ensures proper alignment.

  
  Is the jig sturdy and smooth to operate?

  
  Yes, the jig is known for its solid construction and smooth operation, allowing for controlled, repeatable sharpening. It’s built to hold up well with regular use.

• 

  RIKON

  8" Slow Speed Grinder - 1/2 HP

  +$149.99
  

  RIKON

  8" Slow Speed Grinder - 1/2 HP

  Item #158512 Model 80-805

  More Info

  The RIKON 8" Slow Speed Grinder - 1/2 HP - Model 80-805, features a smooth starting, powerful 1/2 HP motor. The grinder operates at 1,750 RPM, which is ideal for sharpening operations because it reduces heat build-up and minimizes the possibility for “bluing.” This grinder comes equipped with two 1" x 8" white aluminum oxide grinding wheels: one 120-grit wheel and one 60-grit wheel. The cast-iron base features anti-vibration rubber feet and is equipped with mounting holes for convenient attachment to a workbench or grinder stand. A perfect grinder for workshops, turner, carvers and for anyone working with hand tools.
  

  Features:
  

  
  

  • Powerful 1/2 HP motor
  • Low Speed 1,750 RPM
  • Adjustable tool rests
  • Adjustable safety eye shield and spark resistors
  • Cast-iron base with anti-vibration rubber feet
  • Easily mounts to a workbench or grinder stand
  • Safety on/off switch comes with locking key to prevent unauthorized use

  
  

  Specifications:

  
  

  • Motor Horsepower: 1/2 HP
  • Motor Amps: 3A
  • Motor Voltage: 120V, 60 Hz
  • Motor RPM (no load): 1,750 RPM
  • Arbor Size: 5/8''
  • Wheel Size: 1" Wide x 8" Diameter
  • Overall Dimensions: 16-3/8" W x 10-3/4" D x 11-1/4" H
  • Base Size: 7-5/8" x 5-1/2"
  • Cord Length: 6'

  
  

  What's Included:

  
  

  • (1) RIKON 8" Slow Speed Grinder - 1/2 HP - Model 80-805
  • (2) Tool rests
  • (2) Eye shields
  • (2) Spark arrestors
  • (1) 60-grit - Aluminum Oxide wheel
  • (1) 120-grit - Aluminum Oxide wheel
  • (1) Diamond wheel dresser
  • (1) 6' Power cord
  • (1) Five-year warranty

  
  

  FAQs
  

  What’s the difference between a slow speed and a high speed grinder?
  A slow speed grinder operates at a lower RPM, producing less heat and making it ideal for sharpening tools. High speed grinders remove material quickly but can overheat and damage fine edges.

  
  

  What is a slow speed grinder used for in woodworking?
  A slow speed grinder is used to sharpen chisels, plane irons, and other edge tools. Its cooler operation allows for precise sharpening and better edge retention.

  
  

  Can I use a slow speed grinder to sharpen lathe tools?
  Yes, a slow speed grinder is ideal for sharpening lathe tools, allowing you to maintain a sharp, clean edge with greater control and minimal risk of burning the steel.