From Oneida, the Supercell High-Pressure Dust Collector, 55 Gallon, may be the solution to your dust collection problems. Named for one of the world's most powerful cyclonic storm systems, the Supercell is the first and only dust collector on the market with enough static pressure and air movement to effectively capture and contain dust from every tool in the shop with a dust port size of 1" to 5". From the smallest handheld sanders, table saws and miter saws, to jointers, planers and even CNC Routers this unit is a workhorse that can handle some of the largest jobs.

The Supercell is especially useful for problematic 2" diameter ports where standard collectors don't provide adequate suction and wet/dry vacuums can't move enough air to effectively collect dust and debris. With an adaptable design, it mounts conveniently to the wall and can be installed virtually anywhere in the shop. With easy tool connections, connect as far away as 100' and up to 4" hose and ductwork. Packed with innovative features, including HEPA-GFM filtration with internal pulse filter cleaner and dust bin level sensor, the Supercell is the perfect dust collection system for the big or small shop. Patent Pending

• 10x higher suction power than standard dust collectors
• Accommodates simultaneous use of up to 3 tools with 1" to 2.5" dust ports
• 3 - 1300W modular motors (combined 5HP equivalent) operates at 230V with magnetic starter and overload protector
• Wireless remote control operates at radio frequency
• Ultra-high efficiency cyclone separator removes 99% of dust from incoming airstream
• HEPA-Grade Filter Media
• Internal pulse filter cleaner removes clogs in seconds
• 55-gallon steel dust drum with liner bag holder and fill level viewing window
• Dust Sentry automatically alerts when the dust drum/dust bin is full
• Mounts to walls with standard 16" stud spacing. Inlet rotates to match your shop layout.
• Includes 25' of reinforced, 4" diameter vacuum-pressured rated flex hose

• Maximum Suction Rating: 97.8" WC
• Motor Type: 3x 1300W Modular Motors
• Horsepower: 5HP Total
• Motor Speed: 48,800RPM
• Phase: 1PH/Single Phase
• Voltage: 208-230V
• Cycle: 60HZ
• Listed FLA: 18A
• On/Off Switch: Magnetic Starter with on-off Switch preset for Included Remote
• Power Cord Length: 10'
• Power Connector: NEMA 6-20
• Recommended Circuit Size: 20 A
• Recommended Circuit Type: HACR
• Sound Emission: 80 dBA at 10'
• Filter Media Type: HEPA Grade ePTFE Media
• Filter Efficiency: E12 Efficiency Rating
• Filter Surface Area: 40 sq. ft.
• CFM Rating: 465
• Waste Capacity: 55 Gallons
• Primary Build Materials: Cold rolled steel, SD Polyethylene, seam welded
• Static Resistance Rating: Conductive (metal)
• Inlet Size: 4' O.D.
• Discharge Size: 5"O.D.
• Measurements: 23.5"w x 23.5" d x 71.5" h
• Weight: 102lbs

• Fan Motor Assembly
• Magnetic Starter
• Remote Control
• Cartridge Filter
• Pulse Filter Cleaner
• Cyclone Separator
• Wall Bracket
• Blast Gate
• Turn Key Clamp - 2 each
• Dust Drum
• Dust Sentry Bin level indicator
• Bag Retainer System
• 25' x 4" Vacuum Pressure rated Hose
• 5 Liner Bags
• Viewing Window
• Hardware

All returns must be pre-approved. Any non-warranty return will incur a restock fee of 25% and return ship charges. If you have a return issue, contact Woodcraft's Customer Service Department at 1-800-535-4482.

Oneida Air Systems® warrants products it manufactures for a period of 1 or more years depending on the product to the original purchaser from the date of purchase unless otherwise specified. Items not manufactured by OAS are limited to their own manufacturer's warranties. All electrical items such as magnetic starters, remotes, sensors, pumps, bin sensors, bag grippers, etc. and accessories are limited to 90 days. Oneida Air Systems warrants that the product will be free from defects in materials and workmanship. This warranty does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs, alterations, improper wiring or lack of maintenance. This is Oneida Air Systems sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. OAS does not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall OAS's liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New York, County of Onondaga.