Choosing the best dust collector for your shop can be difficult, especially when you start combining mixed/undersized dust port and long runs of ducting or hoses. Oneida Air Systems' patented SMART Boost® technology offers the only solution that can adapt to nearly any shop layout! Where traditional dust collectors are fixed in speed and performance – unable to adapt to different port sizes, duct runs, and requiring careful blast gate management – our new V-System's SMART Boost variable-speed technology automatically adjusts to deliver up to 2-3 times more airflow to your tools. With its compact shape and sound dampening features, the V-System is perfect for garage and basement shops where size and noise play a significant factor. This new system will help you maximize your investment and ensure that your shop is running at peak-efficiency for years to come.

• Industrial 3HP U.S. Made Fan Blower Motor
• SMART Boost Variable Speed Airflow Controller
• Wireless Radio Frequency Remote Control Keyfob
• High-Efficiency Heavy-Gauge Steel Cyclone Separator
• HEPA-Grade Filter Media
• Internal Filter Silencer
• Steel Angle Frame Stand
• 55 Gallon Reinforced Steel Dust Bin
• Dust Sentry™ Bin Fill Level Indicator
• 2 Year Limited Warranty
• cETLus Certified and NFPA Compliance Ready

• SKU: XXVS300055
• Horsepower: 3 hp
• Motor Type: U.S. Motor
• Motor Service Factor: 1.15
• Voltage: 220-240V
• Recommended Breaker Size: 30A
• Amperage (Typical): 15-17.5A
• Phase Option: Single-Phase (Pre-Wired)
• Frequency: 60Hz
• Power Connector Type: 3 Bare Wires, Two Hot & Ground
• Power Cord Length: 7 feet
• Impeller Type: Single-piece, backward inclined, non-sparking/non-ferrous
• Impeller Size: 15" Dia.
• Real CFM Rating: 1,030 Actual CFM at 2" W.C.
• Maximum Suction: 21" W.C.
• Noise Level: 77 dBA at 10 ft
• Motor Speed Type: Variable
• Separation Efficiency: Removes over 99% of fine wood dusts
• Filter Type: HEPA Grade ePTFE Media
• Filtration Efficiency: E12 Minimum Efficiency Rating
• Total Filtration Area: 95 sq ft
• Waste Capacity: 55 Gallons
• Remote Control: Included
• Primary Build Materials: Cold Rolled Steel
• Welding: Seam Welded
• Static Resistance Rating: Conductive (Metal)
• Color: Yellow
• Inlet Size: 6" Dia.
• Outlet Size: Square ID: 7-3/8"(W) x 6-3/8"(H)
• Discharge Size: 9" Dia.
• Width: 49"
• Depth: 33"
• Height: 96"
• Height to Center of Inlet: 70"
• Actual Weight: 315 lbs

• Blower Motor Assembly
• Magnetic Starter
• SMART Boost Controller
• Fan Housing
• Cyclone Separator
• Filter Plenum
• FlameGuard Cartridge Filter
• Internal Silencer
• Freestanding Leg Kit
• Steel Dust Bin
• Bin Level Indicator
• Remote Control

All returns must be pre-approved. Any non-warranty return will incur a restock fee of 25% and return ship charges. If you have a return issue, contact Woodcraft's Customer Service Department at 1-800-535-4482.

Oneida Air Systems® warrants products it manufactures for a period of 1 or more years depending on the product to the original purchaser from the date of purchase unless otherwise specified. Items not manufactured by OAS are limited to their own manufacturer's warranties. All electrical items such as magnetic starters, remotes, sensors, pumps, bin sensors, bag grippers, etc. and accessories are limited to 90 days. Oneida Air Systems warrants that the product will be free from defects in materials and workmanship. This warranty does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs, alterations, improper wiring or lack of maintenance. This is Oneida Air Systems sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. OAS does not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall OAS's liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New York, County of Onondaga.