View a Larger Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
View a Larger Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
View a Larger Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
View a Larger Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
View a Larger Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
  • View a Different Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
  • View a Different Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
  • View a Different Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
  • View a Different Image of 2 Watt Laser Module Kit for Next Wave CNC Machines
  • View a Different Image of 2 Watt Laser Module Kit for Next Wave CNC Machines

Next Wave

2 Watt Laser Module Kit for Next Wave CNC Machines

Item 161352
Model 20002
1 Review
Write a Review

$499.99

Ships Tomorrow!Only a Few Left!
Shipping Info
Check Local Store for Immediate Availability

The 2 Watt Laser Module is an accessory for the industry renowned SHARK CNC machines. The laser mounts in the collet of the palm router and enables you to create detailed photographic engravings, images and lettering. Features:Create highly detailed engravingsVariable power laser with...

More Details

Items You May Need

Details

The 2 Watt Laser Module is an accessory for the industry renowned SHARK CNC machines. The laser mounts in the collet of the palm router and enables you to create detailed photographic engravings, images and lettering.

Features:

  • Create highly detailed engravings
  • Variable power laser with high quality optics for finer control
  • Compatible with Vectric V-Carve software
  • Made in USA
Specifications


  • Variable power laser with high quality optics for finer control
  • Laser Diode Wattage: Less than 3W
  • Laser Color (Visible Range): Blue
What's Included:
  • Next Wave CNC 2 Watt Laser Module
  • Ribbon cable
  • Power supply
  • Protective glasses
Notes:
  • For use with SHARK CNC machine models: SD100, SD110, SD120, HD510, HD520, SHARK II, Piranha FX, Piranha XL, HD 4 and HD 4 Extended.
  • Requires either a SHARK CNC Machine and PC Computer with USB 2.0 port (not included)
  • A free software update may be required on older Next Wave Automation CNC machines.
  • When used with Shark HD3 CNC Machine, the laser interface is also needed (161649).


Articles & Blogs

Cnc yt thumb

We finally get our hands on the fantastic little Shark SD100 CNC Machine from Next Wave Automation. 

Read More >

Reviews

1 Review
Write a Review
  1. by on

    Good but weak

    I got this as a free upgrade when I bought a Next Wave Piranha XL. The physical setup was easy, but I had to download the driver for it from Next Wave, and the learning curve was fairly steep. It definitely works for drawing lines (I'm making snowflakes with it right now) at 40 inches per minute. My only real complaint is that it's not particularly powerful. It takes 3 passes at 10ipm in order to cut through1/16" birch ply. And 1/8" ply? Not really practical, IMO. I'm thinking that I might spring at some point for the 7W laser, if I do a lot of laser cutting. For what it is, I like it. It (and the CNC itself) are very precise. One thing about it - make SURE you follow directions and clean the lens after every hour of use, or the ability to cut will be greatly reduced. I've been using a a Q-tip moistened with ammonia spray, stuck up the hole where the lens is. I took the laser out of the router the other day, and instead of just sticking in a Q-tip, cleaned the laser thoroughly. I'd probably used it for about 12 hrs of use, and it was completely caked with soot, so I'll be taking it out of the router more often.

Compare With