This Kreg Material Support Stop allows you to place pocket holes in exactly the same location on multiple workpieces.The stop can also be swung out of the way to serve as a height support for large panels. Use with Kreg Jig K3 Master System and Kreg drill bits.Features: • Material...
Details
Features:
• Material support stop
• Repeat pocket holes in the same location on multiple workpieces
• Works in conjunction with Kreg drill bits
• Serves as a height support for large panels
Reviews
-
Kreg Jig Support Stop
It has been mentioned this is an accessory for use on one side. It functions just as well on both sides of the jig. Just turn the bolt around, keeping the metal hex nut and knurled collar in the same positions. Works fine. When used with the Mini Track, it makes spacing and repeatability very easy.
-
Works as intended
Wish these were sold in pairs, with a left & right model. Since the two are set up the same, the flimsy plastic bolt and locking plastic knurled nut need to be reverse of each other on set up. Not a big deal, but the supplied nut will be seated in the slot on one, the other the bolt head will be seated in the device. So when they are set up, the two are not mirror images of each other.
-
Kreg Jig Support Stop
Used to set up Kreg pocket hole jig for multiple, identical pieces. Can only be used properly on one side of jig, limiting utility. Stop screw needs to be longer and made out of a stiffer material. Too much flex, short length creates interference problems when setting up the jig itself for use.
