Jasper - Circle Jig, Small, 1" - 7-1/2"
The Jasper Router Circle Cutting Jig is ideal for the speaker maker. Designed primarily for making smaller speaker cut-outs, particularly for tweeters and midranges, it can also flush mounting...
You May Also Like
Item 164070Model M200
Item 821881Model RU5125T
Perfect for tweeters and small midranges, it cuts holes from 1-to-7-1/2-inches. Manufactured from cast acrylic 3/8-inch thick, the jig can be left on the router as a sub base, and be used with MDF, plywood, particle board, solid woods and plastic sheet. Made in the U.S.A., this circle cutting jig mounts directly to the base of 19 different models of plunge routers including Bosch 1615, DeWalt 621 and 625, Freud FT2000E, Hitachi M8V, TR12 and M12V, Porter Cable 690 series and 7539, Skill 1823 and 1835, and all Sears, Ryobi and Makita models.
• Router circle cutting jig ideal for the speaker maker
• 120 different size cutouts in 1/16-inch increments
• Made from 3/8-inch thick cast acrylic
• Designed for smaller speaker cut-outs, tweeters and midranges
• 7- to 18-3/16-inch cutout range; 1- to 7-1/2-inch holes
Not made to last
Bought this on 04/08/2015 and used it the first time about 6 weeks later on a brand new Dewalt DWP611PK compact router. I was making a 2 3/4" circle in 3/4" thick poplar using a new Whiteside 1/4" up cut spiral bit , I made 3 cuts 1/4" deep and on the last cut about halfway thru the base cracked at the screw mounting hole and I had been very careful to not over tighten the screws. Also the sides of the cuts were rough due I think to the Pin moving in the base plate so the cut had several divots around the cut. I just ordered another one because I really like the design and amount of different size cuts that should be possible with this tool and I have a lot of projects that I could use it on. If the new one breaks too I won't buy another one or probably any other Jasper product in the future. Maybe if they would just make it out of aluminum or some other metal it would be a stronger and longer lasting tool. So for now I would Not recommend this but we will see what happens with the new one.
Easy to break otherwise good
This jig will break at screw bosses with repeated use. Use extreme caution tightening screws. Not built to last.
I am 100% satisfied with this item.
I use the jig to make PERFECT CIRCLES for corn toss boards.
Now it's easy
I like the effectivness of this accessoir, makes it real easy to be a speaker-builder.
I would buy this again
Used to cut many 6" holes, worked great