Frequently Bought Together

• Current product. Always included in the bundle total and cannot be deselected.

  

  Festool

  FS 1400/2-KP Guide Rail Starter Set

  $425.00
• 

  Festool

  Bag FS-BAG 1400

  +$89.00
  

  Festool

  Bag FS-BAG 1400

  Item #466357 Model 466357

  More Info

  Guide Rail Tote Bag for use with 55" FS 1400/2 guide rails and shorter, FSB 1400.
• 

  Festool

  Guide Rail Stop OF 1400 EQ

  +$79.00
  

  Festool

  Guide Rail Stop OF 1400 EQ

  Item #492601 Model 492601

  More Info

  Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1400 Router for use with the FS Guide Rail System for perfectly guided, straight routing.

  
  The OF 1400 Guide Stop features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Also included with the Guide Stop is a support foot to levels the router to the surface of the guide rail, ensuring smooth, accurate results and increased stability.

  
  The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router, and two knobs that double as handles for guiding the router along the guide rail.
  

  Features:
  • For attaching OF 1400 EQ router to guide rail system
  • Integral fine adjustment system
  • Support which offsets guide rail height included
• 

  Festool

  Clear Replacement Splinterguard 55"

  +$18.00
  

  Festool

  Clear Replacement Splinterguard 55"

  Item #495207 Model 495207

  More Info

  FS-SP 3000 (55")(1400 mm) replacement
  splinter guard for FS3000/2 guide rail. Replaces the splinter guard 483164. The
  integrated splinterguard is a critical guide rail system component, and after
  some time and heavy use, will need to be replaced. Replace your splinterguard
  as needed to ensure perfect alignment of your guide rail to the cut line, and
  to protect against tear out, on cuts both with the grain and across. Though you
  should expect many cuts from your original splinterguard, its life expectancy
  is heavily dependent on your application. Keep your cuts perfectly splinter-free
  by periodically replacing your splinterguard, especially if you are switching
  between blades, or using the guide rail with more than one saw.

  
  

  
  

  • A clear splinterguard enhances visibility of cut line

  • A fresh splinterguard can be matched perfectly to the saw blade, providing precise alignment to your cut line, saving valuable set up time

  • A fresh splinterguard is the best protection against tear out, for cuts both with the grain and across

  • Change your splinterguard if you are switching between different kerfed blades or different saws, ensuring a precise match
    

  • Replacement splinterguard for Festool FS3000/2 Guide Rail

  • Includes one 55 inch (1400mm) transparent splinterguard

  
  

• 

  Festool

  Multifunction Table - MFT/3

  +$849.00
  

  Festool

  Multifunction Table - MFT/3

  Item #495315 Model 495315

  More Info

  The “New” and improved Multifunction Table is taller and is 15% lighter than the previous model (MFT 1080) but still provides a strong, sturdy, portable worktable whose guide rail, dual position fence, swivel unit, and stops make clean cuts and precise angles fast and easy. This multi-function table enables a Festool plunge saw to function as a chop saw, radial arm saw, and miter box. When used with Festool routers and saws, exact repeat operations are performed with ease. Features: large support area for safe cutting quick and easy setup and breakdown, foldaway legs with easier to access tensioning knobs, angle stop can be used in any position on the table, adjustable leg to accommodate uneven surfaces while keeping the table level, height-adjustable guide rail lowers onto work-piece for safe sawing of small and narrow work. Includes (2) guide rail supports, angle unit, fence rail, adjustable stop and guide rail FS 1080. Festool products can only be sold in the 50 states.

  
  

  Features:
  

  • Sturdy work surface for cutting, sanding, routing, and assembly can support up to 260 pounds
  • MFT table can be collapsed and used on the floor when required
  • Rubber-capped feet protect your floor
  • An adjustable leveling foot allows you to use the MFT table in the most irregular of surfaces

  Specifications:

  • Table Height with Legs Folded: 7'' (180 mm)
  • Weight: 61.73 lbs (28 kg)
  • Maximum Workpiece Width: 27'' (700 mm)
  • Table Dimensions: 45'' (1157 mm) x 30'' (773 mm)
  • Table Height with Legs Unfolded: 35'' (900 mm)
  • Maximum Workpiece Thickness: 3-5/64'' (78 mm)
  • Load Capacity: 264.555 lbs (120 kg)
  • Festool Model Number: 495315

  What's Included:

  • (1) Festool MFT/3 Multifunction Table Kit
  • (2) Guide Rail Supports
  • (1) Protractor Unit
  • (1) Fence Rail
  • (1) Fence Rail Clamp
  • (1) Material Stop
  • (1) 42'' Guide Rail

  Notes:

  • Festool products can only be sold in the 50 states.

  FAQs

  
  How much weight can the table hold?

  
  The MFT/3 has a rated load capacity of 120 kg (about 265 lb). This supports heavy workpieces, clamping pressure, and mounted tools when the table is properly set up on its legs.

  
  Does the MFT/3 work with non-Festool tools?

  
  Yes. While optimized for the Festool system, the MFT/3 can be used with non‑Festool tools, especially for clamping, assembly, sanding, or routing, as long as they can be secured or guided safely. Full system features like guide‑rail integration and repeatable precision are best when used with Festool‑compatible rails and accessories.

• 

  Festool

  FS-BAG 1900 Guide Rail Carrying Bag

  +$105.00
  

  Festool

  FS-BAG 1900 Guide Rail Carrying Bag

  Item #578069 Model 578069

  More Info

  The Festool® FS-BAG 1900 Guide Rail Carrying Bag ensures that guide rails are perfectly protected, transported and stored. The bags have a large main compartment, in which one or two guide rails up to a length of 1900 mm can be housed. The bag offers protection against dirt and damage, and thus increase the service life of the guide rail.
  
  

  Features:
  

  
  

  • The bags offer protection against dirt and damage, and thus increase the service life of the guide rail
  • A shoulder strap enables worry-free and convenient carrying
  • Made from especially robust fabric
  • Available in three sizes: FS-BAG 1400 for FS 1400, FS-BAG 1900 for FS 1900 and FS-BAG 3000 for FS 3000

  
  

  What’s Included:

  
  

  • (1) Festool® FS-BAG 1900 Guide Rail Carrying Bag