View a Larger Image of Cigarillo Ballpoint Pen Kit Chrome
View a Larger Image of Cigarillo Ballpoint Pen Kit Chrome
  • View a Different Image of Cigarillo Ballpoint Pen Kit Chrome
  • View a Different Image of Cigarillo Ballpoint Pen Kit Chrome
  • Default
Item 163805
Model 17145-CHR

WoodRiver - Cigarillo Ballpoint Pen Kit Chrome

$9.99

Qty 1-9 10-19 20-49 50-99 100+
Each $9.99 $8.99 $8.49 $7.99 $7.49

The “Cigarillo Pen” is the smaller cousin of the famous “Cigar Pen” in a narrower platform but packed with all the same great features and good looks. Kit features a Parker® style refill that has...

Items You May Need

Compare With

Details

The “Cigarillo Pen” is the smaller cousin of the famous “Cigar Pen” in a narrower platform but packed with all the same great features and good looks. Kit features a Parker® style refill that has been paired with a long lasting, high quality double twist mechanism, rollerball clip, durable plating, and a comfortable tapered nib for hours of easy writing. Overall finished length is approximately 5-5/16". Kit requires a 3/4" x 3/4" x 5" pen blank, letter “O” pen maker’s bit, Cigarillo pen bushings and pen maker’s mandrel, all sold separately. Kits are also available in gold (#163804) and gunmetal (#163806).

Features:

• Durable plating

• High quality, long lasting double twist mechanism

• Same great looks as the Cigar just on a narrower platform

• Kit requires a pen blank, letter “O” pen maker’s bit, pen bushings and pen mandrel (all sold separately)

Videos

Reviews

3.0 out of 5 stars
3 Reviews
  1. 3.0 out of 5 stars
    by on

    A Little Disappointing

    Once I cracked the bag open and looked up the instructions online and saw that you had to cut a tenon I kinda rolled my eyes. Most of the other manufacturers have moved away from this as they can be problematic, especially if you don't cut a perfectly straight tenon (I use my parting tool to cut away some extra under the tenon in an inverted slope towards the tube to make sure it will sit flush.) As the other reviews have said, the fit on this kit is just barely off. I had a gap between the cap and bottom and ended up having to sand down the top part of the twist mechanism to get it to sit flush-ish. My cap blank was the length specified in the instructions as was my bottom blank. Seems they need to go back and check the fit of this kit. It's a shame, because it is actually a nice looking pen when it's finished.

  2. 4.0 out of 5 stars
    by on

    Flaw in instructions

    I am relatively new to making pens, and this took me a pen or two to figure out what I was doing wrong. I was having problems with the twist mechanism and the pen would rather separate the cap from the body than actually work like it is supposed to. I have found that when assembling the Pen, it is best to screw the twist mechanism fully onto the twist adapter, then press it into cap. This ensures that the pen will not want to separate every time you try to retract the pen. This is just my experience, and I hope it helps.

  3. 2.0 out of 5 stars
    by on

    poor instructions and the kit is so-so

    The instructions are not very good , the tenon that is part of the procedures introduces potential problems. There are gaps in the completed pen. There's no accurate way to align the designs from the cap to the body prior to assembly. Nice sized pen but poor execution from instruction to tenon. Whenever I have run into a pen kit that introduces a tenon mid way between cap and body I have run into problems That's my 2 cents, but your mileage may vary.

Top of Page