Carter Products - Urethane Tire For 14" Band Saw, 7/8" Wide
Even under occasional use, the tires on band saw wheels periodically need to be replaced. Carter ULTRA BLUE™ Urethane Tires are made from the highest quality material to exacting standards. That’s...
Item 144968Model AC-TQ12
Item 819402Model AC-TQ10
Item 144970Model AC-TQ16
Item 144971Model AC-TQ18
Item 812765Model DEL14
Item 148113Model AC-ID-1000
Item 812766Model JET14
- ULTRA BLUE urethane tires offer uniform thickness over entire width
- Urethane tires provide greater durability and resistance to damage
- Allows for optimum blade tracking
- 7/8" wide x 3/32" thick tire may be trimmed for width
- Includes one tire sized for most 14" band saws
Articles & Blogs
I was cutting a small wood
piece on my 14" JET Bandsaw, using a 3/8" fine-tooth blade. Pulling
the part back towards me caused the piece to hang up on the bandsaw blade in
the piece, and the blade came completely off the upper wheel. If you have done
this, you know how frightening it can be. Metal on metal noises erupt, as well
as distinctive sketching sounds from the lower wheel spinning against the loose
Fits like a glove.
Bought this for my Porter Cable 14" band saw model PCB330BS and the tire fits perfectly. I couldn't be happier.
New tires made my 20 year old Delta 14" bandsaw better than new! Fairly easy to install. I also added the Carter guides and tension spring. This is the fastest/best upgrade for any bandsaw.
Very pleased with band saw tune up
This was part of an over all bandsaw tune up including blades, low friction rub blocks, and tires. The combined effect was quite remarkable. I'm now only limited by my ability to set the machine up and am encouraged to take on more challenging projects. There is a bit of a knack to mounting the tires. Be sure to leave the tire in the hot water long enough so the plastic is fully up to temperature, then go for it.
Carter Urethane Tire
Follow directions and it is no problem to install. This is a very good tire. I have had no slippage or any problems with it. When necessary I will replace it with the same tire.
These tires do not fit all 14" bandsaws. Carter does not provide a list either. I purchased these for a 14" Grizzly G0555 only to find out after installation that the tires move from side to side on the wheel if the wheel is slightly wider than the tires. Apparently this is a known issue and Carter's solution is to spot tack the tires to the wheels with epoxy. Why not just provide a warning for customers on the packaging. Disappointing from such a quality company. A waste of time and money. I would not recommend these tires because of Carter's failure to make the buyer aware of the possibility of movement.
with they were 1" wide to better fit my saw, but they work 7/8" and the blade rides fine so far.
My bandsaw works great
My Father gave me an 18 yr old bandsaw and all it needed were the tires. Instructions were very helpful. You have to let it warmup in hot soapy water for 5 min. and then put on. The top one went on fairly easy, but the bottom was harder. I ended up using two plastic grip clamps to hold my progress as I moved around the wheel. The blade runs true on the tires and I haven't had any problems.
Lose your rubber tires!
Getting rid of the stock rubber tires on my 12 year old 14" Jet and installing these urethane tires made a HUGE difference in the performance of my saw. For the first time, my blades track perfectly, even after long resawing sessions. Installation was easy - just folow the directions to the letter. It helps to have a second person to help hold the wheel as the new tire goes on.
Heat and place
Heat and place, No problems bandsaw runs true and quite.
I would buy again
a little tough to install ,but worth it.
I'M A PROFESIONAL WOOD WORKER. THE BANDSAW TIRES ARE JUST WHAT I NEEDED TO REFURBISH AN OLD ROCKWELL BANDSAW
Great purchase - Nice Quality
Have not had a problem....Great problem
Easy to install and solved my problem
Installed on a Delta 14" with riser blocks. Took a while to get the trick of installing on the first one, but the second went quickly. READ and FOLLOW the instructions which are included and pretty well written.
no problems at all. only problem is the negative attitude at my local store, which is why I refuse to go there to look, to purchase, or anything else