Securing your workpiece to the bed of your CNC router often creates a challenge. The Axiom Vacuum Hold Down Kit is a terrific accessory which makes securing your part a snap. Use just one pod to secure a small part or all five pods to hold something large.
These compact vacuum pods are made from clear acrylic and each has its own vacuum seal. Each pod is connected together to cover a large area. Place the pods on your Axiom CNC table and secure with screws and T-nuts (included). Pods can be mounted either on top of your MDF spoil board or directly to the aluminum table by selecting the appropriate length screws. Cut the 1/4” hose to the desired length and connect the pods and valve to the vacuum port on the venture. Use the remaining hose and fitting to connect your compressor to the air port on the venture
Included

• Vacuum Pods: 5 pieces
• On/off valve
• Venturi vacuum pump
• Mounting hardware
• End cap
• Hose (200”)
• Air fitting
• Replacement gasket material

Please note: 1.5 CFM of compressed air at 90 PSI is required. (Air compressor sold separately)

All customer returns, excepting defects, are subject to a 20% restocking fee. If you need help initiating a return, please contact Woodcraft Customer Service at 1-800-535-4482.

Axiom Tool Group warrants their products to be free from defects in materials and workmanship for a period of 1 year. If you have a warranty inquiry, please contact Axiom Tool Group at 844-642-4902.
Free Technical Support direct from Axiom