View a Larger Image of 4" Caster, Double Locking, Swiveling with 4 Hole Mounting Plate
WoodRiver 141050W
Item 141050

4" Caster, Double Locking, Swiveling with 4 Hole Mounting Plate



Save 25% Now Through April 26, 2018

You May Also Like


Put your entire shop on wheels! Load rating for each caster is 300 lbs. Easy rolling, non-marring, polyurethane tires will not "flat spot" during long periods of remaining stationary. Swivel and wheel ride on ball bearings for smooth rolling and turning. Double brake locks both wheel and swivel rotation with the touch of a toe. Unlike cheaper casters, which only lock the wheel and allow the supported load to move around as the caster rotates on its base, these provide a rock solid base. 4" casters are 5-1/8" tall. Plate size is 2-3/4" W x 3-3/4" L. Distance between holes is 1-3/4" x 3" center to center.

  • Double Locking
  • Load rating for each caster is 300 lbs
  • Plate size is 2-3/4" W x 3-3/4" L.
  • Distance between holes is 1-3/4" x 3" center to center


Articles & Blogs


Continuing our woodworking adventures into Alabama, we arrive at the home of Woodcraft Magazine senior editor, Joe Hurst-Wajszczuk to cover his 20′ x 22′ interior garage space morphing into an extreme workshop makeover. The 2011 October/ November Issue #43 of Woodcraft Magazine features a special topic on this floor to ceiling, wall to wall transformation with detailed projects, providing instruction on turning any garage, basement or outside structure into a viable workshop. Joe is tasked with converting his 20′ x 20′ two-car attached garage into an organized, fully functioning, safe workshop. The “BEFORE” photo below will give you an idea of what Joe started with.  If the clutter and disorganization looks similar to your work area, then perhaps this information may help you build a workshop makeover too.

Read More >

In part 4, we take a look at a deluxe crosscut station, complete with a lumber rack storage area on the backside. In addition this unit features a tilt-out bin, sliding drawers, adjustable shelving, and customizable pigeon compartments. Designed by Craig Bentzley and built by Joe Hurst-Wajszczuk, this article is written by Paul Anthony and is featured in Woodcraft’s October/November Magazine, Issue #43.

Read More >

After 21,961 de-duped entrees to the Gold Rush Sweepstakes sponsored by Woodcraft, Powermatic and Woodcraft Magazine, we have our winners list to share with you.  The contest promotion ran from August 1 to September 30th, 2013 where there were 5,552 store entries and 16,409 online & mail-in entries.  Winners were selected on October 10, 2013.

Read More >


4.89 out of 5 stars
19 Reviews
  1. 5.0 out of 5 stars
    by on

    Great Casters

    I have several sets of these casters on heavy shop cabinets in my woodworking shop, and have never had one problem.

  2. 5.0 out of 5 stars
    by on

    worth the money

    Casters roll over cracks with little if any deflection. Double lock feature keeps your item right where you want it.

  3. 5.0 out of 5 stars
    by on

    Great Casters

    Purchased many of these for work and home. Made many roll around carts for bench top tools in my small workshop. Casters are strong easy to steer and locking mech is easy to operate. I've compared many casters, these were the best I have been able to find and at a good price.

  4. 5.0 out of 5 stars
    by on

    Far Superior to Alternatives

    I've used various sizes of these casters and have been extremely happy with all of them. The double locking braking works very well, is easy to engage and disengage, and works great for stable workshop platforms and cabinets. The tires are very strong and supportive of heavy tools, but have the width and give to easily ride around uneven or dirty floors. I find the 4 inch and 5 inch casters best for bumpy floors with heavy tools & carts. Anything less than these casters, no matter how inexpensive, is a false economy. I've been gradually replacing all my older casters with these. Buy these!

  5. 5.0 out of 5 stars
    by on

    nice casters

    built a couple of storage / work benches that primarily remain in front of windows. butcher block top heights match another movable work bench

  6. 5.0 out of 5 stars
    by on

    Solid, not apt to develop flat spots.

    I plan to use them for a portable book wagon; an application that needs wheels that stay round.

  7. 5.0 out of 5 stars
    by on

    Excellent product

    Excellent product that was even better when on sale.

  8. 5.0 out of 5 stars
    by on

    outstanding product

    locks great

  9. 5.0 out of 5 stars
    by on

    Top-quality casters

    Make sure to allow enough room. The wheel is 4 inches in diameter. A 4" caster actually raises the height of the table/cart/etc about 5-1/8" above the floor.

  10. 5.0 out of 5 stars
    by on

    great product for the price

    I used this product on my heavy moulding planer and it does the job very well.

  11. 5.0 out of 5 stars
    by on

    One of the best Casters I have used!

    The brakes work very well. I used these castors on a rolling cart project which holds six water cooler bottles (about 300 lbs). Even when parked on a hill in the winter the brakes hold.[...]

  12. 5.0 out of 5 stars
    by on

    Probably the Best caster on the market

    I bought these casters because I wanted the best for a work bench I built that covers my table saw then doubles as an an out feed table. When I am not using my table saw it covers my saw and becomes a good work table and takes up the same space as my table saw. These casters make it easy to move the bench and also lock the bench in place so it doesn't move.

  13. 4.0 out of 5 stars
    by on

    Rolling Smoothly

    Put the casters on the table/bench that nests my new Big Green Egg. Together they weigh close to 200lbs and it rolls quite smoothly.

  14. 5.0 out of 5 stars
    by on

    Great Caster

    I used this caster on a mobile miter saw station and they support the weight with ease. The 4" wheels allow the station to move around my shop with ease. Great value for the price and very well made.

  15. 5.0 out of 5 stars
    by on

    Wheelie Great

    After buying cheap casters for years, I first bought these for a roll-around work table I built for my shop. They roll around my basement shop easily & smoothly. Liked them so much, I ordered these for mobile bases for some of my machines. Well worth the money.

  16. 5.0 out of 5 stars
    by on

    Very good casters over several years.

    We have used this caster on shop carts and moving dollies for several years now and they have been very good. The 4" wheel is large enough to not be overly affected by bumps, threseholds, etc. The dual locking device works exceptionally well and the tire compound is floor-friendly when we have to take a dollie into a customer's home (although we do wipe the wheels off before doing so). Sometimes it's hard to justify spending this much money (we have lots of carts and several moving dollies), but you get what you pay for. I believe that these are made off-shore, but the quality appears to be first rate.

  17. 5.0 out of 5 stars
    by on

    Excellent quality

    These casters are really well made and better quality than I could find locally at home improvement stores. I put them under some rolling cabinets in my shop and I needed both the swivel and wheel to lock. I expect decades of good service from them.

  18. 5.0 out of 5 stars
    by on

    I will buy more of these for my woodshop

    Great for rolling cabinets in my shop.

  19. 4.0 out of 5 stars
    by on

    Nice wheels!

    We use the locking casters on all the workstations in the shop. The double lock prevents the "shimmy" that happens with non-locking swivel casters. Plus, the polyurethane doesn't flat-spot like rubber wheels, and they can handle something like 300lbs apiece! Hopefully your workstation doesn't weigh 1200lbs! Overall, great product

Top of Page