WoodRiver - 12" x 12" Table Saw Dust Extraction Fitting
These economical fittings will help you build a high performance dust extraction system for your shop. Made of ABS plastic (except for the aluminum blast gates), these fittings are designed to...
You May Also Like
Item 147788Model YW1079
Item 421778Model 73107
Item 421773Model 72100
• 12'' x12'' Table Saw Dust Extraction Fitting
• 4'' Opening
• Rugged ABS Plastic
• Abrasion Resistant
Great Idea! (Iffy Execution.)
The tapered "Port", when combined with the matching tapered quick disconnect 4" O.D. Dust Collection Fitting (item #140259) will work - if you use either a rubber band for a friction fit (if you regularly need to move it to more than one machine), or, with a suitable adhesive (such as E-6000) if you're never going to move it again. So, yes, I would recommend this to a fellow woodworker with the appropriate forgoing modifications. In fact, I may try affixing the rubber band to the inside of the 4" quick disconnect - if that doesn't interfere with connecting it to the straight, un-tapered, 4" hose to 2¼" fitting connector I also need to use.
Couldn't make it work
tried several options to adapt this and other ABS chutes to 2-1/2" collection system. Possable with many fittings but space was probibiting. Shame too as this would have worked so well.
It's a Contractor's table saw accessory that gives the saw a bad name in the way of dust collection performance. I have a much better solution.
This unit is 12x12 is size. The opening is a tapered opening with an OD of 3-3/4". You can not clamp on a hose as it would slide off. In order to use this effectively, one must retrofit a hose to it or find the proper piece that will fit it. No matter what one uses, because of its design the hose adapter will not stay on.