WoodRiver Saw Blades

Accurate, precise, consistent, reliable – these are the words that one associates with a quality saw blade. Now, you can add WoodRiver® to that list. A product of top-notch Israeli manufacturing, the WoodRiver Saw Blades combine high-grade German steel with premium-grade Ceratizit ™ carbide tips to deliver a superior cut on an edge that will stay sharper longer than other blades on the market. Plus, a copper plug insert reduces not only noise but also vibration. One cut and the WoodRiver® Saw Blade will be the last brand you buy.  

A thin kerf saw blade removes less material when cutting. Use a thin kerf blade to optimize the performance of saws with less power. Alternate Top Bevel tooth configuration set with a 15° hook angle and large gullets clear away wood efficiently for great rips or crosscuts.

Alternate Top Bevel tooth configuration scores both sides of the cut before cleaning out the bulk resulting in a smoother cut and less splintering. 15° hook angle and large gullets clear away wood efficiently for great rips or crosscuts.

Flat Top Grind tooth configuration set with a 20° hook angle allows for fast, efficient cuts along the grain and through thick pieces of wood. When first breaking down your boards or you have to do a ton of rips in thick stock, this is the blade you want. 
Triple Chip Grind tooth configuration has a lead tooth with 45° degree corner bevels followed by a slightly lower square tooth that cleans up the corner pieces left behind. This blade will give you beautiful, clean, glue-ready cuts in material 1" or less.
Alternate Top Bevel tooth configuration set with a 10° hook angle is optimized to deliver precise, clean crosscuts in hardwood and plywood. Compatible with both table saws and miter saws.

Alternate Top Bevel tooth configuration set with a negative 5° hook angle produces a smoother finish for crosscutting. Compatible with both miter saws and compound miter saws.

Hi Alternate Top Bevel tooth configuration set with a negative 6° hook angle scores both edges of a dado before cleaning out the bulk leaving clean 1/4" to 61/64" grooves. Dado cuts across the grain or grooves with the grain. 

Make box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. Install the two blades back-to-back or face-to-face to cut perfectly flat and square 1/4" or 3/8" box joints. 

WATCH OUR BLADES IN ACTION

Top of Page