Woodcraft Baltimore – Hands-On Woodworking Classes & Daily Expert Advice

$175.00

All Levels

Intro to Woodshop

with Ryan Benson

Part 1: Sunday, December 7, 2025, 1 PM - 5 PM

Part 2: Sunday, December 14, 2025, 1 PM - 5 PM

This class is the perfect introduction to the woodshop! Students will be introduced to the most important tools in a woodshop as they go through milling, shaping, and finishing to create a beautiful cutting board/serving tray to take home. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$175.00

All Levels

Intro to Woodshop

with Ryan Benson

Part 1: Monday, December 8, 2025, 3 PM - 7 PM

Part 2: Monday, December 15, 2025, 3 PM - 7 PM

Required Tools

This class is the perfect introduction to the woodshop! Students will be introduced to the most important tools in a woodshop as they go through milling, shaping, and finishing to create a beautiful cutting board/serving tray to take home. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$150.00

Intermediate

NEW CLASS! Introduction to Hollow Vessels

with Bruce Lamb

Tuesday, December 9, 2025, 4 PM - 7 PM

Required Tools

This class will build on skills developed in the spindle turning class and introduce a number of new skills that are important in woodturning. After creating the basic shape between centers, we will complete the piece by creating a tenon for a chuck (to hold the piece from one end), drilling on the lathe, hollowing out the vessel, and finishing up by using a jam chuck to complete the bottom of the vessel. We will make a small vase using these new skills. Introduction to the Lathe and Spindle Turning is a required prerequisite.

$225.00

All Levels

Intro to Box Making

with Ryan Benson

Part 1: Thursday, December 11, 2025, 3 PM - 7 PM

Part 2: Thursday, December 18, 2025, 3 PM - 7 PM

Required Tools

This class is a great introduction to making mitered boxes! Students will learn how to cut accurate miters, assemble boxes, and install hinges to create an attractive lidded box. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$295.00

All Levels

Intro to Epoxy Resin - with Live Edge Slab

with Mike Reier

Part 1: Friday, December 12, 2025, 3 PM - 7 PM

Part 2: Friday, December 19, 2025, 3 PM - 7 PM

In this two part Intro to Epoxy Resin class students will learn every step of the process, including fitting a live edge slab into a mold, mixing epoxy (with colors), pouring the epoxy, removing the mold, shaping and finishing. Students will take home their very own live edge and epoxy resin piece which can be used as a serving board or small table top or wall art.

$145.00

All Levels

Kissmass Tree

with David Lloyd

Saturday, December 13, 2025, 1 PM - 6 PM

In this class, students will utilize the table saw and drill press to cut and assemble their very own Kissmass Tree as seen in Woodcraft Magazine. Materials included (except Hershey Kisses!)

$95.00

All Levels

NEW CLASS! Intro to Scroll Saw - Ornament

with George Rothmann

Tuesday, December 16, 2025, 4 PM - 7 PM

Required Tools

In this introductory scroll saw class, students will learn about the scroll saw itself as well as safety, techniques and project ideas. Plenty of practice time is built in to this class with multiple holiday patterns to choose from, including the pictured ornaments.

$125.00

All Levels

Intro to Routers - Charcuterie Board

with Ryan Benson

Wednesday, December 17, 2025, 3 PM - 7 PM

Required Tools

This class is a great introduction to routers and router templates! Students will use a plunge router and router template to make a pair of interlocking charcuterie boards to take home and show off. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$135.00

All Levels

Dovetail Techniques

with Sarah Marriage

Saturday, December 20, 2025, 9 AM - 1 PM

In this hands-on technique class, students will learn to cut traditional hand-cut dovetails using a backsaw and chisels. We’ll cover layout strategies, sawing tips, and paring techniques to achieve clean, tight-fitting joints. The focus is on skill-building rather than making a finished product, so students can refine their technique through repetition and feedback. This class is perfect for those looking to deepen their understanding of joinery and improve their precision with hand tools.

$165.00

All Levels

Fundamentals of Woodworking - Plant Stand

with Sarah Marriage

Saturday, December 20, 2025, 2 PM - 6 PM

Required Tools

In this class students will make their very own plant stand while learn two of the most fundamental joints in woodworking: the mortise and tenon and the lap joint. This a great class for the beginner or for someone wanting to expand their joinery capabilities. Materials included.

$115.00

All Levels

Basic Relief Carving

with Mike Clarkson

Tuesday, December 30, 2025, 1 PM - 5 PM

Learn how to layout and create patterns without a template. Carve patterns and scenes using a v-tool and gouges. These "applied" designs are a great way to add some pop to your projects. With a small kit many designs are possible, such as the bird carving students will also practice. Materials included.

$95.00

All Levels

Pen Turning - Wall Street II

with David Welch

Saturday, January 3, 2026, 10 AM - 1 PM

Required Tools

Intended as an introduction to pen turning. Students will learn turning safety, tools, and techniques on the lathe and use the bandsaw and drill press to create a beautiful pen to take home. Materials included.

$115.00

Beginner/Intermediate

Turn a Salt or Pepper Grinder

with David Welch

Saturday, January 3, 2026, 2 PM - 6 PM

Required Tools

Turn your own salt or pepper grinder. This class offers students a chance to incorporate a grinder hardware kit into their turning experience. Materials included.

$95.00

All Levels

Intro to the Lathe and Spindle Turning

with Bruce Lamb

Tuesday, January 6, 2026, 4 PM - 7 PM

Required Tools

Intended for new turners. Students will get hands-on experience while learning turning safety, tools, and techniques. Instruction will focus on spindle turning and traditional lathe tools. Students will take home a small spindle turned item. Let's make something! Materials included.

$395.00

Intermediate

NEW CLASS! Wall Cabinet

with Ryan Benson

Part 1: Thursday, January 8, 2026, 3 PM - 7 PM

Part 2: Thursday, January 15, 2026, 3 PM - 7 PM

Part 3: Thursday, January 22, 2026, 3 PM - 7 PM

Part 4: Thursday, January 29, 2026, 3 PM - 7 PM

Required Tools

This is a great class for people with a little bit of woodworking experience! In this class, students will make a hanging wall cabinet with a plywood case, frame and panel door, and adjustable shelves. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$95.00

All Levels

Intro to Scroll Saw

with George Rothmann

Friday, January 9, 2026, 3 PM - 6 PM

In this introductory scroll saw class, students will learn about the scroll saw itself as well as safety, techniques and project ideas. Plenty of practice time is built in to this class with multiple patterns to choose from, including the pictured Maryland puzzle.

$115.00

All Levels

NEW CLASS! Carving in the Round

with Tim Lippa

Saturday, January 10, 2026, 2 PM - 6 PM

This beginner course introduces the fundamentals of carving in the round, with a focus on safe and effective use of carving tools. Participants will learn how to plan a project from concept to execution, including layout and material considerations. The class then focuses on carving a simple figure, giving students hands-on experience to build confidence and foundational skills.

$125.00

All Levels

Intro to Routers - Charcuterie Board

with Ryan Benson

Sunday, January 11, 2026, 1 PM - 5 PM

Required Tools

This class is a great introduction to routers and router templates! Students will use a plunge router and router template to make a pair of interlocking charcuterie boards to take home and show off. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$295.00

All Levels

Intro to Epoxy Resin - with Live Edge Slab

with Mike Reier

Part 1: Monday, January 12, 2026, 3 PM - 7 PM

Part 2: Monday, January 19, 2026, 3 PM - 7 PM

Required Tools

In this two part Intro to Epoxy Resin class students will learn every step of the process, including fitting a live edge slab into a mold, mixing epoxy (with colors), pouring the epoxy, removing the mold, shaping and finishing. Students will take home their very own live edge and epoxy resin piece which can be used as a serving board or small table top or wall art.

$95.00

Beginner/Intermediate

Bowl Turning

with Bruce Lamb

Tuesday, January 13, 2026, 4 PM - 7 PM

Required Tools

*PRE-REQUISITE REQUIRED* Intended for turners wanting to learn how to use a bowl gouge. Students will learn the basic design elements and methods to use a bowl gouge for clean cutting, how to mount a bowl blank on the lathe, be introduced to additional lathe tools, understand the requirements for a sharp tool, and make a small bowl. The bulk of the class is a hands-on experience. Intro to the Lathe and Spindle Turning class or Instructor Permission is required.

$115.00

All Levels

Bandsaw Basics

with Sarah Marriage

Saturday, January 17, 2026, 10 AM - 1 PM

Required Tools

In this class students will learn the fundamentals of using a bandsaw, including set-up, blade types and cutting techniques.

$295.00

All Levels

Fundamentals of Woodworking - Shaker-Style Side Table

with Sarah Marriage

Part 1: Saturday, January 17, 2026, 2 PM - 6 PM

Part 2: Saturday, January 24, 2026, 2 PM - 6 PM

Required Tools

In this class, students will build a solid wood side table with the clean, classic look of Shaker design—using modern, beginner-friendly techniques. We’ll use the Festool Domino for joinery and a tapering jig on the table saw to shape the legs. Students will glue up their own tabletops and learn how to attach them in a way that allows for natural wood movement. This is a great project for building confidence with furniture-making basics while creating a beautiful and functional piece.

$225.00

All Levels

Intro to Box Making

with Ryan Benson

Part 1: Sunday, January 18, 2026, 1 PM - 5 PM

Part 2: Sunday, January 25, 2026, 1 PM - 5 PM

Required Tools

This class is a great introduction to making mitered boxes! Students will learn how to cut accurate miters, assemble boxes, and install hinges to create an attractive lidded box. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$125.00

All Levels

Intro to CNC

with Joe Stein

Tuesday, January 20, 2026, 3:30 PM - 7 PM

Required Tools

This class will provide students with a basic understanding of a CNC machine as well as Vetric software. Students will learn to design and create CAD/CAM code that can be saved and utilized on their CNC getting the same results each time. Students will make and take home a personalized name plate with added embellishments. Required tools - Laptop with Vetric Software installed before the class (we're happy to offer guidance for downloading and installing Vetric), USB Drive 2.0, no larger than 2GB.

$175.00

All Levels

Intro to Woodshop

with Ryan Benson

Part 1: Wednesday, January 21, 2026, 3 PM - 7 PM

Part 2: Wednesday, January 28, 2026, 3 PM - 7 PM

Required Tools

This class is the perfect introduction to the woodshop! Students will be introduced to the most important tools in a woodshop as they go through milling, shaping, and finishing to create a beautiful cutting board/serving tray to take home. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$125.00

All Levels

Intro to Chip Carving

with Sarah Marriage

Saturday, January 24, 2026, 10 AM - 1 PM

Students will learn basic chip carving techniques. Students will also take home a chip carving knife to continue honing their new skill. Materials included.

$95.00

All Levels

Basic Relief Carving

with Mike Clarkson

Tuesday, January 27, 2026, 2 PM - 5 PM

Learn how to layout and create patterns without a template. Carve patterns and scenes using a v-tool and gouges. These "applied" designs are a great way to add some pop to your projects. With a small kit many designs are possible, such as the bird carving students will also practice. Materials included.

$340.00

All Levels

NEW CLASS! Moxon Vise

with Albert Kleine

Part 1: Saturday, January 31, 2026, 1 PM - 5 PM

Part 2: Sunday, February 1, 2026, 1 PM - 5 PM

Required Tools

When cutting dovetails, standard bench vises generally don’t fit the bill. Holding wide stock for work on the ends (like when cutting dovetails) is where the Moxon vise excels. In this class, we’ll build our own Moxon vises using WoodRiver hardware following the plans laid out by instructor Albert Kleine in the cover project of Popular Woodworking #283. In addition to ensuring that the vises function as intended, we’ll spend a good amount of time cutting and shaping profiles — ogees, lambs tongues, and chamfers — to make our vises as beautiful as they are useful.

$95.00

All Levels

Intro to the Lathe and Spindle Turning

with Bruce Lamb

Monday, February 2, 2026, 4 PM - 7 PM

Required Tools

Intended for new turners. Students will get hands-on experience while learning turning safety, tools, and techniques. Instruction will focus on spindle turning and traditional lathe tools. Students will take home a small spindle turned item. Let's make something! Materials included.

$1,500.00

All Levels

NEW CLASS! Solid Body Electric Guitar

with Gary Flowers

Part 1: Tuesday, February 3, 2026, 1 PM - 6 PM

Part 2: Tuesday, February 10, 2026, 1 PM - 6 PM

Part 3: Tuesday, February 17, 2026, 1 PM - 6 PM

Part 4: Tuesday, February 24, 2026, 1 PM - 6 PM

Part 5: Tuesday, March 3, 2026, 1 PM - 6 PM

Part 6: Tuesday, March 10, 2026, 1 PM - 6 PM

Required Tools

In this class, led by experienced local luthier, Gary Flowers (garyflowersguitars.com; garyflowersguitars on Instagram), students will make their very own high end custom electric guitar. Starting with a wood body blank, ready-made neck, and custom components, students will shape the body, assemble the components, apply a finish and set up their guitar. The cost of the class includes a mahogany or swamp ash wood blank which will be shaped into a telecaster style guitar with a Tru Oil finish. Upgrades available include stratocaster style body, pick ups, and finish type. Call store for an upgrade price list.

$125.00

All Levels

Intro to Routers - Charcuterie Board

with Ryan Benson

Wednesday, February 4, 2026, 3 PM - 7 PM

Required Tools

This class is a great introduction to routers and router templates! Students will use a plunge router and router template to make a pair of interlocking charcuterie boards to take home and show off. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$395.00

Intermediate

NEW CLASS! Box Making 2

with Ryan Benson

Part 1: Thursday, February 5, 2026, 3 PM - 7 PM

Part 2: Thursday, February 12, 2026, 3 PM - 7 PM

Part 3: Thursday, February 19, 2026, 3 PM - 7 PM

Part 4: Thursday, February 26, 2026, 3 PM - 7 PM

Required Tools

This class is a great next step after Intro to Box Making! Students will learn to make a more intricate mitered box with features such as splines, internal dividers, and a drop-in tray. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$115.00

All Levels

NEW CLASS! Carving in the Round

with Tim Lippa

Saturday, February 7, 2026, 1 PM - 5 PM

This beginner course introduces the fundamentals of carving in the round, with a focus on safe and effective use of carving tools. Participants will learn how to plan a project from concept to execution, including layout and material considerations. The class then focuses on carving a simple figure, giving students hands-on experience to build confidence and foundational skills.

$175.00

All Levels

Intro to Woodshop

with Ryan Benson

Part 1: Sunday, February 8, 2026, 1 PM - 5 PM

Part 2: Sunday, February 15, 2026, 1 PM - 5 PM

Required Tools

This class is the perfect introduction to the woodshop! Students will be introduced to the most important tools in a woodshop as they go through milling, shaping, and finishing to create a beautiful cutting board/serving tray to take home. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$150.00

Intermediate

NEW CLASS! Introduction to Hollow Vessels

with Bruce Lamb

Monday, February 9, 2026, 4 PM - 7 PM

Required Tools

This class will build on skills developed in the spindle turning class and introduce a number of new skills that are important in woodturning. After creating the basic shape between centers, we will complete the piece by creating a tenon for a chuck (to hold the piece from one end), drilling on the lathe, hollowing out the vessel, and finishing up by using a jam chuck to complete the bottom of the vessel. We will make a small vase using these new skills. Introduction to the Lathe and Spindle Turning is required.

$155.00

All Levels

NEW CLASS! Date Night - Pizza Cutter & Server

with David Welch

Friday, February 13, 2026, 4 PM - 7 PM

Required Tools

Couples in this class will turn handles for a pizza slicer and a pizza server! The Class will cover selecting and preparing wooden blanks, turning handles, applying a food safe finish, and attaching the hardware. Each person will turn one handle. Pizza time! One registration/tuition covers two people.

$165.00

All Levels

Fundamentals of Woodworking - Plant Stand

with Sarah Marriage

Saturday, February 14, 2026, 2:30 PM - 6:30 PM

Required Tools

In this class students will make their very own plant stand while learn two of the most fundamental joints in woodworking: the mortise and tenon and the lap joint. This a great class for the beginner or for someone wanting to expand their joinery capabilities. Materials included.

$295.00

All Levels

NEW CLASS! Fundamentals of Woodworking - Bench

with Mike Clarkson

Part 1: Monday, February 16, 2026, 1 PM - 5 PM

Part 2: Monday, February 23, 2026, 1 PM - 5 PM

Required Tools

In this class, students will learn the fundamentals of bench making while focusing on lumber selection and milling, glue up for seat, leg angle layout, and joinery. Students will take home a solid wood bench that will be great as a seat, step stool, or general-purpose shop bench.

$225.00

All Levels

Intro to Box Making

with Ryan Benson

Part 1: Wednesday, February 18, 2026, 3 PM - 7 PM

Part 2: Wednesday, February 25, 2026, 3 PM - 7 PM

Required Tools

This class is a great introduction to making mitered boxes! Students will learn how to cut accurate miters, assemble boxes, and install hinges to create an attractive lidded box. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$155.00

All Levels

NEW CLASS! Festool Shop - Cabinet/Systainer Rack

with David Lloyd

Friday, February 20, 2026, 1 PM - 6 PM

Required Tools

Curious about Festool? In this class students will make a utility cabinet using Festool tools including the Domino 500, Festool track saws/rails and sanders, extractors and the MFT3 table system. The cabinet is sized to accommodate Festool Systainers using the Systainer rail system (rails not included) so it can store up to three Systainers or it can be used as a general purpose open front cabinet.

$95.00

All Levels

Intro to Scroll Saw

with George Rothmann

Saturday, February 21, 2026, 1 PM - 4 PM

In this introductory scroll saw class, students will learn about the scroll saw itself as well as safety, techniques and project ideas. Plenty of practice time is built in to this class with multiple patterns to choose from, including the pictured Maryland puzzle.

$295.00

All Levels

Intro to Double-Bevel Marquetry

with Albert Kleine

Part 1: Sunday, February 22, 2026, 1 PM - 5 PM

Part 2: Sunday, March 1, 2026, 1 PM - 5 PM

Join master craftsman and book author, Albert Kleine, for this introductory course in marquetry, the practice of inlaying wood veneers to create images. It emphasizes traditional double-bevel methods using only hand tools. The first session covers theory and process, including geometry, tools, and sawing technique. By the end, you’ll be able to inlay veneer into a backer – foundational for marquetry. In the second session, you’ll apply your skills to create a simple leaf design. Advanced techniques, such as layering, grain orientation, sand-shading, and managing oxidation and shrinkage, will also be discussed to enhance your marquetry skills. This course is beginner-friendly, equipping you with essential techniques for more complex projects. Some woodworking experience is helpful but not required; all skill levels are welcome!

$125.00

Beginner

NEW CLASS! Intro to Relief Carving

with Mike Clarkson

Friday, February 27, 2026, 1 PM - 5 PM

In this class, students will learn how to transfer an image onto the wood, the best grain direction to carve in and techniques to get that smooth cut. Other topics covered will include sharpening, getting the most out of your tools, tool selection, wood types for carving, work bench height and clamping. After working on a practice design, students will have a few designs to choose from for a final carving.

$295.00

All Levels

Intro to Epoxy Resin - with Live Edge Slab

with Mike Reier

Part 1: Monday, March 2, 2026, 3 PM - 7 PM

Part 2: Monday, March 9, 2026, 3 PM - 7 PM

Required Tools

In this two part Intro to Epoxy Resin class students will learn every step of the process, including fitting a live edge slab into a mold, mixing epoxy (with colors), pouring the epoxy, removing the mold, shaping and finishing. Students will take home their very own live edge and epoxy resin piece which can be used as a serving board or small table top or wall art.

$175.00

All Levels

Intro to Woodshop

with Ryan Benson

Part 1: Thursday, March 5, 2026, 3 PM - 7 PM

Part 2: Thursday, March 12, 2026, 3 PM - 7 PM

Required Tools

This class is the perfect introduction to the woodshop! Students will be introduced to the most important tools in a woodshop as they go through milling, shaping, and finishing to create a beautiful cutting board/serving tray to take home. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$135.00

All Levels

Dovetail Techniques

with Sarah Marriage

Saturday, March 7, 2026, 9 AM - 1 PM

In this hands-on technique class, students will learn to cut traditional hand-cut dovetails using a backsaw and chisels. We’ll cover layout strategies, sawing tips, and paring techniques to achieve clean, tight-fitting joints. The focus is on skill-building rather than making a finished product, so students can refine their technique through repetition and feedback. This class is perfect for those looking to deepen their understanding of joinery and improve their precision with hand tools.

$295.00

All Levels

Fundamentals of Woodworking - Shaker-Style Side Table

with Sarah Marriage

Part 1: Saturday, March 7, 2026, 2 PM - 6 PM

Part 2: Saturday, March 14, 2026, 2 PM - 6 PM

Required Tools

In this class, students will build a solid wood side table with the clean, classic look of Shaker design—using modern, beginner-friendly techniques. We’ll use the Festool Domino for joinery and a tapering jig on the table saw to shape the legs. Students will glue up their own tabletops and learn how to attach them in a way that allows for natural wood movement. This is a great project for building confidence with furniture-making basics while creating a beautiful and functional piece.

$395.00

Intermediate

NEW CLASS! Wall Cabinet

with Ryan Benson

Part 1: Sunday, March 8, 2026, 1 PM - 5 PM

Part 2: Sunday, March 15, 2026, 1 PM - 5 PM

Part 3: Sunday, March 22, 2026, 1 PM - 5 PM

Part 4: Sunday, March 29, 2026, 1 PM - 5 PM

Required Tools

This is a great class for people with a little bit of woodworking experience! In this class, students will make a hanging wall cabinet with a plywood case, frame and panel door, and adjustable shelves. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$145.00

All Levels

Kitchen Knife

with Mike Reier

Part 1: Monday, March 16, 2026, 4 PM - 7 PM

Part 2: Monday, March 23, 2026, 4 PM - 7 PM

Required Tools

In this class, you will use a Zhen 4 3/4" Santoku knife blank to learn how to shape and attach a custom handle to create a unique knife. This high-quality knife is made of Japanese Damascus steel and is perfect for multi-tasking around the kitchen.

$95.00

All Levels

Intro to the Lathe and Spindle Turning

with Bruce Lamb

Tuesday, March 17, 2026, 4 PM - 7 PM

Required Tools

Intended for new turners. Students will get hands-on experience while learning turning safety, tools, and techniques. Instruction will focus on spindle turning and traditional lathe tools. Students will take home a small spindle turned item. Let's make something! Materials included.

$125.00

All Levels

Intro to Routers - Charcuterie Board

with Ryan Benson

Wednesday, March 18, 2026, 3 PM - 7 PM

Required Tools

This class is a great introduction to routers and router templates! Students will use a plunge router and router template to make a pair of interlocking charcuterie boards to take home and show off. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$225.00

All Levels

Intro to Box Making

with Ryan Benson

Part 1: Thursday, March 19, 2026, 3 PM - 7 PM

Part 2: Thursday, March 26, 2026, 3 PM - 7 PM

Required Tools

This class is a great introduction to making mitered boxes! Students will learn how to cut accurate miters, assemble boxes, and install hinges to create an attractive lidded box. This is a hands-on experience so safety will be the top priority. Safety glasses, hearing protection, and materials are included.

$115.00

All Levels

Carving in the Round

with Tim Lippa

Saturday, March 21, 2026, 1 PM - 5 PM

This beginner course introduces the fundamentals of carving in the round, with a focus on safe and effective use of carving tools. Participants will learn how to plan a project from concept to execution, including layout and material considerations. The class then focuses on carving a simple figure, giving students hands-on experience to build confidence and foundational skills.

$95.00

Beginner/Intermediate

Bowl Turning

with Bruce Lamb

Tuesday, March 24, 2026, 4 PM - 7 PM

Required Tools

*PRE-REQUISITE REQUIRED* Intended for turners wanting to learn how to use a bowl gouge. Students will learn the basic design elements and methods to use a bowl gouge for clean cutting, how to mount a bowl blank on the lathe, be introduced to additional lathe tools, understand the requirements for a sharp tool, and make a small bowl. The bulk of the class is a hands-on experience. Intro to the Lathe and Spindle Turning class or Instructor Permission is required.

$125.00

Beginner

NEW CLASS! Intro to Relief Carving

with Mike Clarkson

Wednesday, March 25, 2026, 1 PM - 5 PM

Required Tools

In this class, students will learn how to transfer an image onto the wood, the best grain direction to carve in and techniques to get that smooth cut. Other topics covered will include sharpening, getting the most out of your tools, tool selection, wood types for carving, work bench height and clamping. After working on a practice design, students will have a few designs to choose from for a final carving.

$95.00

All Levels

Bowl Turning with Carbide Tools

with David Welch

Saturday, March 28, 2026, 9 AM - 1 PM

Required Tools

In this class, students will learn to turn a bowl with carbide tipped Easy Wood Tools. Suggested pre-requisites are other classes taught by David Welch.

$105.00

All Levels

Turning - Gardening Tools

with David Welch

Saturday, March 28, 2026, 2 PM - 6 PM

Required Tools

This class will use the WoodRiver three-piece Garden Tool Turning kit to create your own custom gardening tool set.

$95.00

All Levels

Intro to Scroll Saw

with George Rothmann

Monday, March 30, 2026, 3 PM - 6 PM

Required Tools

In this introductory scroll saw class, students will learn about the scroll saw itself as well as safety, techniques and project ideas. Plenty of practice time is built in to this class with multiple patterns to choose from, including the pictured Maryland puzzle.

$125.00

All Levels

Intro to CNC

with Joe Stein

Tuesday, March 31, 2026, 3:30 PM - 7 PM

Required Tools

This class will provide students with a basic understanding of a CNC machine as well as Vetric software. Students will learn to design and create CAD/CAM code that can be saved and utilized on their CNC getting the same results each time. Students will make and take home a personalized name plate with added embellishments. Required tools - Laptop with Vetric Software installed before the class (we're happy to offer guidance for downloading and installing Vetric), USB Drive 2.0, no larger than 2GB.

All Specials

All Power Tools & Accessories

All Hand Tools

All Hardware

All Wood

All Finishing

All Workshop

All Kits & Projects

All Learn

Woodcraft of Baltimore

$175.00

All Levels

Intro to Woodshop

Part 1: Sunday, December 7, 2025, 1 PM - 5 PM

Part 2: Sunday, December 14, 2025, 1 PM - 5 PM

$175.00

All Levels

Intro to Woodshop

Part 1: Monday, December 8, 2025, 3 PM - 7 PM

Part 2: Monday, December 15, 2025, 3 PM - 7 PM

$150.00

Intermediate

NEW CLASS! Introduction to Hollow Vessels

Tuesday, December 9, 2025, 4 PM - 7 PM

$225.00

All Levels

Intro to Box Making

Part 1: Thursday, December 11, 2025, 3 PM - 7 PM

Part 2: Thursday, December 18, 2025, 3 PM - 7 PM

$295.00

All Levels

Intro to Epoxy Resin - with Live Edge Slab

Part 1: Friday, December 12, 2025, 3 PM - 7 PM

Part 2: Friday, December 19, 2025, 3 PM - 7 PM

$145.00

All Levels

Kissmass Tree

Saturday, December 13, 2025, 1 PM - 6 PM

$95.00

All Levels

NEW CLASS! Intro to Scroll Saw - Ornament

Tuesday, December 16, 2025, 4 PM - 7 PM

$125.00

All Levels

Intro to Routers - Charcuterie Board

Wednesday, December 17, 2025, 3 PM - 7 PM

$135.00

All Levels

Dovetail Techniques

Saturday, December 20, 2025, 9 AM - 1 PM

$165.00

All Levels

Fundamentals of Woodworking - Plant Stand

Saturday, December 20, 2025, 2 PM - 6 PM

$115.00

All Levels

Basic Relief Carving

Tuesday, December 30, 2025, 1 PM - 5 PM

$95.00

All Levels

Pen Turning - Wall Street II

Saturday, January 3, 2026, 10 AM - 1 PM

$115.00

Beginner/Intermediate

Turn a Salt or Pepper Grinder

Saturday, January 3, 2026, 2 PM - 6 PM

$95.00

All Levels

Intro to the Lathe and Spindle Turning

Tuesday, January 6, 2026, 4 PM - 7 PM

$395.00

Intermediate

NEW CLASS! Wall Cabinet

Part 1: Thursday, January 8, 2026, 3 PM - 7 PM

Part 2: Thursday, January 15, 2026, 3 PM - 7 PM

Part 3: Thursday, January 22, 2026, 3 PM - 7 PM

Part 4: Thursday, January 29, 2026, 3 PM - 7 PM