Gifts Dads Can Use To Work Wood Smarter and Easier

 

Give the Dads on your Father’s Day Gift List who are woodworkers something that will contribute to an enjoyable project experience, whether it’s building cabinets, furniture, boxes or something else. To jumpstart your list, Woodcraft offers a few suggestions from the 30,000 products available at your local Woodcraft retail store, through the monthly catalogs, and at woodcraft.com.

WoodRiver® Bevel Edge Socket Chisel SetThe Woodcraft Product Development Team designed these chisels specifically for woodworkers who do dovetail joinery or other work in tight areas. Their attention to detail shows in the geometry of the grind that sweeps back and out of the way when cutting in corners, along with the flatness of the back. The eight-chisel line is forged from 100 CR-V steel, factory-ground to a 25° bevel, and tempered in a salt bath to HRC58-63. Set includes 1/4", 1/2", 3/4" and 1" width chisels, which are also available individually. Other sizes available individually are 1/8", 3/8", 5/8" and 1-1/4". Chisels come with Edge Keep™ silicone tip protectors.

 

Four-piece set includes (from left):  1", 3/4", 1/2" and 1/4" chisels, plus silicone tip protectors.

Complete eight-chisel set ranges from 1/8" to 1-1/4".

 

>>>>>>>>>>>> 

Bosch ROS20VSC 5" VS Random Orbit SanderDad can remove material quickly and achieve a well-blended, ultra-smooth finish, thanks to this sander’s optimized combination of pad orbit and rotation. Sander’s design also eliminates a common complaint: swirl marks on the workpiece. 120V motor; 7,500 to 12,000 OPM; 4.4 lbs. Orbit Diameter: 3/32"; Orbit Radius: 3/64". Uses hook-and-loop sandpaper.

 

Random Orbit Sander

Handle holds straight scraper blade. Three concave and one convex profile blades are also shown.

 

WoodRiver® Deluxe Scraper Set With this five-scraper set Dad will always have the right profile scraper handy, regardless of whether he is removing old finish, glue or layout marks or giving a planed surface a final smoothing. Cut across or against the grain without tearing the wood. Set includes 5-3/4" hardwood handle, five easy-to-change blade profiles – straight, 1-1/2" convex, and 1/2", 7/8" and 1-1/4" concave, and a wooden storage case. 1-1/2" forward knob offers fine pressure control. 

>>>>>>>>>>>> 

Festool T18 Easy Cordless Drill Plus SetHelp Dad drill more effectively with the T18 that features a new generation brushless ED-TEC motor and electronic torque setting for precise screw driving and drilling wood or steel. Use most drill bits, from 1/16"- to 1/2"-diameter, with the metal keyless chuck. Keep your drill handy with the integrated belt clip, and the right bit at the ready in the built-in bit storage area.

Maximum torque – wood: 309.8 in. lbs. drill 1-3/4"; maximum torque – steel: 442.5 in. lbs. drill 1/2". Drilling diameter: 1-3/4" (wood), 1/2" (steel). Tool weight with battery pack: 4.189 lbs.

Includes T18 Easy Cordless Drill, belt clip, two 4.0 AH HighPower battery packs, Rapid Charger TCL 6 and Systainer SYS3 M 187 storage container.

 

Drill, Belt Clip, 2 battery packs, rapid charger and Systainer storage container.

12" Combination Blade, Square Head and Center Finder.

Pinnacle® 3-Piece 12" Combination SquareThis combination of blade, square head and center finder are all Dad will need for virtually any layout project. The 12" stainless steel blade is graduated in 8ths and 16ths on one side and 16ths and 32nds on the other and accurate to within +/- .003″ between any two graduations, and +.006/-.004″ from 0 to any graduation. The square head is accurate to +/- .005″ and comes with a level vial and stainless steel scribe tool. This Made in the USA marking and measuring combo comes in a fitted case.

Complementary Pinnacle® Tools Sold Separately

The Pinnacle 4" and 6" Double Squares offer Dad the accuracy of engineer’s squares with the adjustability common to larger combination squares. He can use them for machine and jig setup or laying out joints. 

 

>>>>>>>>>>>>

 

Woodcraft® Gift Cards Gift Cards are available at woodcraft.com and at Woodcraft retail stores. Choose a $25, $50, $100, $150, $200, $250, or $500 gift. For additional dollar amounts, ask a store associate or call Woodcraft customer service (800-225-1153). A Woodcraft Email Gift Card is the perfect last minute gift! Visit woodcraft.com/giftcard to order one.

 

 

Woodcraft Magazine SubscriptionSix premium issues a year deliver woodworking projects of all sizes, as well as skill-building techniques, the latest tools and tool innovations, specialized storage, dust collection, shop setup, features about wood, and much more. Choose a 1-year or 2-year print subscription or a 1-year digital subscription by visiting woodcraft.com.

 

Issue 101 June/July 2021

Issues 1 through 100 on a Thumb Drive

 

Woodcraft Magazine 2005-2021 on a Thumb DriveThe first 100 issues of Woodcraft Magazine in one convenient platform: a computer thumb drive. With this essential shop tool, you can effortlessly search an archive of over 16 years of valuable woodworking advice – hundreds of knockout projects, honest tool reviews, shop-proven tips and techniques at your fingertips. 

>>>>>>>>>>>> 

Select gifts that will inspire the fathers on your list to use their creative skills. 

TOGETHER, WE CAN CREATE ANYTHING®

 

Back to blog