Cold Press Veneer Glue, Quart
Titebond Cold Press glue is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of...
You May Also Like
- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapors
- Safe - nonflammable
Articles & Blogs
Not what I needed
I thought I was in luck when I came across this product, as it appeared to be a significantly less expensive alternative to Better Bonds Titan DX. I am sure this glue would be fantastic for raw wood or two ply veneers, however I almost entirely use paper backed veneer....this just doesn't cut it when compared to Titan DX. Oh well...
Finally a glue I can trust for veneering
Was able to glue down marquetry veneer without fear of rippling due to expansion. However glue not readily available in Canada - had to order from USA.
Easiest glue to use for veneering
Simply the easiest glue I have found for veneering! No mixing, easily spreadable, good open time, dries hard for no movement. Plus if you are using a vaccum press the glue does not need air to cure.
Perfect for veneer work
I used this veneer glue on a large surface (7'x 1') and had sufficient time to spread the glue, apply the veneer, cover with layers of wood, and add clamps. When dry, the veneer was firmly attached with no bubbles. Note that this is a yellow glue and is not reversible like a hide glue.
works great with vacuum press
I've been searching for a glue with a long open time for quite some time. I've used Titebond's hyde glue but often its to thick. This is a thin watery glue thats super strong and almost invisible! I can glue large door panels and 10 minutes later readjustments are easy. No bleed thru on thin or porus veneers in my vacuum press either. Great product!