View a Larger Image of Original Cylinder Burr, 1/8" Shaft, Coarse (1/8" x 7/8")
Kutzall C-18-E
Item 162968

Original Cylinder Burr, 1/8" Shaft, Coarse (1/8" x 7/8")

$11.50

The Kutzall tool line is designed to provide fast stock removal with an outstanding finish, thanks to exclusive tungsten-carbide coatings that make it the best value in the industry. The 1/8"-shaft...

You May Also Like

Details

The Kutzall tool line is designed to provide fast stock removal with an outstanding finish, thanks to exclusive tungsten-carbide coatings that make it the best value in the industry. The 1/8"-shaft burrs are used in flex shaft tools, hand grinders, or other machinery using 1/8" collets or adjustable chucks. They are not prone to loading, but may easily be cleaned with solvent or burned clean with a gas torch. Heat generated from the torch will not harm the teeth. Kutzall burrs are handmade in America (the Motor City suburbs, to be exact!).

Note: Diameter and head length dimensions on Kutzall burrs are base dimensions. The coatings add approximately .060" - .160".
  • Cut flat areas or round over edges
  • Produce 90-degree corners
  • Tilt to make V-cuts
  • Cut on both the OD and the end of the tool
  • Head diameter: 1/8" x 7/8"
  • Grit: coarse

Top of Page