Teknatool - NOVA IDNS Chuck Insert/Adaptor 1" 8TPI Thread
Adapt your Insert Type NOVA Chuck to a 1” 8TPI lathe with this NOVA IDNS 1" 8TPI Chuck Insert. This allows you to keep the same chuck and accessories if you change your lathe, you’d only need to...
You May Also Like
Item 163327Model JM-BTD1Silver
Shipping / Billing Information
This product ships direct from the manufacturer:
- Your order will ship in approximately 5 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Very fine product!
This product worked perfect for what i needed!
it was excatly as described
I have two lathes with differnt spindle threads so I use one chuck and switch the adapter as required, later on I will probably buy another chuck from Nova and the I will allready have the adapter for it.
exactly as advertised
I recently purchased a mini lathe and I need this insert for my nova chuck to fit. The product arrived and sliiped right on. A perfect fit.
Help in buying item invaluable
I needed an adapter for the lathe chuck I just bought. Woodcraft email help was invaluable in getting the exact right size.
this should have been included in th eprice of the chuck
Kinda screwey inside and out.
Just what I needed
Excelent FIT,No Runout
I found this insert to fit much better than some others that I have used.Results in less runout with a better finished product.
DON'T JUDGE BY ITS COVER
I PURCHASED AN INSERT AND IT WAS IN A PLASTIC WOODCRAFT BAG. I ALSO PURCHASED A 3/4 INSERT AND IT CAME IN A TEKNATOOL BOX. WAS THE 1" A TECKNATOOL INSERT OR WAS IT MADE IN CHINA. THE INSTRUCTIONS FROM TECHNATOOL DO NOT RECOMMEND THE USE OF NON TECHNATOOL ACCESSORIES
Change hub because of new lathes.
Purchased a new lathe, and had a 1/12 hub, needed the 1/8 to fit both new lathes.
It's so nice to be able to use my chucks on more than one lathe by just changing out the adapter.
Of course you need this part to mount your Teknatool chucks to your lathe. Tech Support can help you determine which one you need if you can't figure it out.
Tells every thing you need
will use with chuck to turn larger projects on back side of head. Its small and ready to use. Havent had anything show up so far.
Very useful to use my chuck!