Mast-R-Fence II Router Table Fence
JessEm router table fences glide smoothly in tracks and anchor firmly with a twist of the molded lock-down knobs. It is a precision machined aluminum extrusion with red anodized finish. The PVC coated MDF fence face adjusts for varying bit diameters and has extruded shim-bars for...
JessEm router table fences glide smoothly in tracks and anchor firmly with a twist of the molded lock-down knobs. It is a precision machined aluminum extrusion with red anodized finish. The PVC coated MDF fence face adjusts for varying bit diameters and has extruded shim-bars for jointing type operations. There are two 1/4” T-tracks above the fence faces for anchoring accessories. The molded 2-1/4” dust collection port mates with most shop vacuum hoses. It fits router table tops from 24” to 32” wide and 1/2” to 1-1/2” thick. It is an update to the very popular original, featuring a dual track fastening system with adjustable scales and a horizontal scale along the top face of the 3-5/8” high router table fence.
• Precision machined aluminum extrusion with red anodized finish
• PVC coated MDF fence faces adjust for varying bit diameters
• Extruded shim-bars for jointing type operations
• Fits router table tops from 24” to 32” wide and 1/2” to 1-1/2” thick
• Molded 2-1/4” dust collection port mates with most shop vacuum hoses
Manufacturer Update - The Fence Bracket mounting screws are now packaged in the Router Table Top
Articles & Blogs
Great addition to the router table
I paired this with the JessEm Rout-R Table top and am very pleased with it. The split fence with the shim bars allowed me to use my router with a straight bit to do some joining on rough White Oak boards. The track system allows for use of feather boards, stop blocks and jigs. I use my 4" wall mounted shop vac attachement to the fence and it picks up the fine dust. You still get the heavy sawdust material dropping below the table though.
Expect wrong hardware!!
I purchased the Mast-R-Top and the Mast-R-Fence II at the same time. The 8 cap screws supplied with the fence to attach the rails had threads that were too fine. They simply didn't fit at all. However, the cap screws supplied with the table to attach the stand actually fit the locations for the side rails. Go figure... So, I was able to get the rail on the table; however, that was only because I bought both together. I also found that the screw for the bushing to center the fence was too short. I had to trim down the bushing to get it to fit. After getting the bushing installed, I found that it still allowed about a 1/16" of play side-to-side. Not impressed with that part. The table was flat. I had read other reviews that had issues with that; I didn't have that problem. All in all it is a nice table and fence, but I would expect them to be a little bit better at getting the hardware right...how much does that take?
very nice w/both sides connecting to the table. Professional grade stuff
It screams accuracy
If you're sick of fighting to get professional results from your router fence, this fence takes the worries out. It's Standard features and high quality means precision results on your router table.