Table Leg Corner Brace
For simple and economical attachment of table legs to frames, use this corner brace. Ends of the brace are set into grooves in the frame, and hanger bolts then attach leg to the brace. Heavy galvanized steel. 1-1/2" x 4". Mounting screws and hanger bolts not included.Features:Attaches...
- Attaches table legs to frame
- Heavy galvanized steel
- 1-1/2" x 4"
- Sold individually
- Hardware and screws not included
Very good, just what I needed/wanted,
Perfect, and delivered quickly
Works as designed
works as designed
Great product. It worked "perfectly"
Great service!!! I will purchase items again real soon.
Used these to assemble a large 8/4 walnut table with 4x4 legs. Very sturdy. Just need to wedge out the corner of the legs for larger table application.
yep, works awesome
I made a large pine 8/4" dining table (33"x70") The skirts are 2x6s. I used two braces per corner as I was concerned with the strength of the brackets becase the tabletop was so heavy, but 1 probably would have done it. The table is very stable. No wiggle at all. I do recommend is using a narrow kerf saw to accomodate the bracket. I used a blade that was bigger than the width of the bracket and when I was intalling the bracket it was hard to keep it perfectly even. Also, measure the pilot holes (in the leg) for the hanger bolts. Dont hold the leg in place and simply drill using the bracet as a guide. Product works as advertised.
From the info online, it appeared it could be used with larger table legs. The units are made for much smaller table systems
Just what we needed.
These braces were exactly what we were looking for. They held the 4x4 legs we attached to our table with no problem. Installation was simple. I would definitely recommend these braces.
"solid design and easy to install"
great for table or bench assembly work