WoodRiver Dust Connection
DWV PVC Pipe To 4" Dust Port Adapter Fitting
Unique WoodRiver® Dust Connection™ adapter allows you to connect most 4” dust collection fittings like elbows, tees, wyes and blast gates to most light-weight 4” DWV (drain, waste, vent) PVC pipe commonly available at home-centers.Features:Connect most 4” dust collection fittings to...
Unique WoodRiver® Dust Connection™ adapter allows you to connect most 4” dust collection fittings like elbows, tees, wyes and blast gates to most light-weight 4” DWV (drain, waste, vent) PVC pipe commonly available at home-centers.
- Connect most 4” dust collection fittings to most common 4” DWV PVC pipe
- Tapered 4” ID end fits over 4” port found on many dust collection fittings
- Small diameter end slides inside most 4” DWV PVC pipe
- Durable, abrasion resistant construction
- Size: Smaller side outside diameter approximately 4.000 inches
- Material: ABS plastic
- (1) WoodRiver Dust Connection - DWV PVC Pipe To 4" Dust Port Adapter Fitting
Does not fit SDR-35 DWV pipe
The product makes a ton of sense and fits inside Schedule 40 pipe. However, it does not fit inside SDR-35 DWV pipe. It is essentially the same size. Not sure if the SDR-35 is a Northeast US thing, as I have not been able to find any Schedule 30 pipe anywhere. I do not know if this will fit in Schedule 30 pipe. My options are to keep the fittings and go with more expensive Schedule 40 pipe, or redesign my piping altogether. I only have 3 drops, but Schedule 40 can really add up in cost. My recommendation would be to take your adapter to the big box store and test it before buying any pipe.
Correctly Works on Jet Dust Collectors
I have the Jet DC1100M and this connector is one that fits the 4 inch collector so that I can swap hoses quickly. Others were slightly too small (even though the other items also said they were 4" connectors) and fell off even if you jammed them on. This one smoothly goes on but is tight enough to ensure great suction. I imagine any Jet Dust Collector with the 4 inch ports would work fine with these. Sometimes it's maddening to get the exact right 4" connector as they are all not standardized.
This works as it should. The only bummer is that you actually need to use these. Any fitting, be it a "y" or a "t" or gate you will need two of these. Price adds up quickly!
I would buy this product again.
I use it my dust collection system.
WoodRiver Dust ConnectionItem 172001
WoodRiver Dust ConnectionItem 85O06
WoodRiver Dust ConnectionItem 163445