View a Larger Image of 5" to 4" Reducer Dust Collection Fitting

WoodRiver Dust Connection

5" to 4" Reducer Dust Collection Fitting

Item 154576
Model YW1027
4 Reviews
Write a Review

$7.99

Ships Tomorrow!
Shipping Info
Check Local Store for Immediate Availability

Use this WoodRiver® Dust Connection™ Reducer Dust Collection Fitting to connect 4" dust collection hose to 5" OD machine ports and 5" dust collection hose. Made in the USA.Features:Connect most 4" dust collection hose to machines with 5" OD portsTapered port on one side fits inside most...

More Details

Details

Use this WoodRiver® Dust Connection™ Reducer Dust Collection Fitting to connect 4" dust collection hose to 5" OD machine ports and 5" dust collection hose. Made in the USA.

Features:

  • Connect most 4" dust collection hose to machines with 5" OD ports
  • Tapered port on one side fits inside most 4" dust collection hose
  • Flanged middle section for ease of assembly
Specifications:
  • Straight port actual size is 4-7/8" OD to fit most 5" machine ports
  • Material: Constructed of tough abrasion resistant plastic resins
What's Included:
  • (1) WoodRiver® Dust Connection™ - 5" to 4" Reducer Dust Collection Fitting

Reviews

4 Reviews
Write a Review
  1. by on

    Works on SDD

    I purchased this with intentions of having to use a heat gun on my Super Dust Deputy to get it to fit. When I tried it I found that with a little wiggling it slides into the opening. Once in some tapping with a rubber mallet seats the reducer completely. With a little effort I was still able to remove it. Unless you're using metal tubes for dust collection save some money and buy this instead of the Oneida branded reducer.

  2. by on

    Use of 5" to 4" reducer with Powermatic 20" planer

    This reducer is the same size on the 5" end as the port on my Powermatic planer and therefore does not fit (Both 4-7/8" OD). Posted to keep someone else from buying if they have the same situation.

  3. by on

    Works Great - 20" Planer

    I used it to reduce a 5" port on my Grizzly 20" planer, down to a 4" flex hose. Works perfectly for this. The OD on the adapter is less than 5", so this adapter fits inside the port on my tool. I tapped it in to place with a mallet, giving it a very tight fit. The 4" Flex hose slips over the other end of the adapter; giving me exactly what I need. Thanks.

  4. by on

    Does not fit my HF DC intake

    It was to small in diameter to fit on my harbour freight dust collector intake.

Compare With